Download a copy of the Installation Instructions. On models with a shipping rod, it is located on the right side panel, toward the bottom of the washer, between the front and rear legs. It is 23″ long and keeps the tub in place during shipping.
Do LG top load washers have shipping bolts?
Thanks. Answer Hello Tony, top load washers do not use shipping bolts , only front load washers do.
How do you transport a top loading washing machine?
Transporting your washer: Place inlet hoses inside washer basket. Drape power cord and drain hose over the console and secure with masking tape. Place foam packing ring from original shipping materials back inside the washer. If you do not have a packing ring, place heavy blankets or towels into basket opening.
Do you need shipping bolts for washer?
Impact of Moving A Front Load Washer Without Shipping Bolts: You can fill it with the help of the furniture blankets. You can remove the power cord and drain hoses, then wrap the washer with some dolly straps and then load it onto the dolly or truck for transport.Do all new washing machines have transit bolts?
Normally when you get your new washing machine there will be two (rare), three or four transit bolts fitted through the rear panel of the washing machine that fix to the outer tank of the washing machine. … These bolts must be removed before the washing machine is used.
How do you secure a washing machine drum for transport?
Install washer locks or foam: Refer to your owner’s manual for help securing the drum during the move. Top-loading machines may simply require you to wedge cardboard or foam between the drum and the case. Front-loaders are often secured by inserting shipping bolts in the rear of the machine.
Can you lay down a washing machine to transport?
It’s recommended you always keep a washing machine in an upright position. Laying a washer on its side can cause the inner and outer tubs to bump against each other, which can loosen support pads or damage the suspension. It can also cause the tubs to move out of alignment and alter the way your unit works.
Are shipping bolts necessary?
The shipping bolts keep the tub secure during a move and reduce the amount of vibration that could damage the suspension. If you do not have the necessary shipping bolts, you can purchase them through an appliance repair center.What are washer shipping bolts?
A transit bolt, also called a washer shipping bolt, is installed through the back a washing machine to keep the tub from moving around during shipping.
How many shipping bolts does a Samsung washer have?Answer Trever, there are four shipping bolts DC97-14489R used with the model provided. What shipping bolts do I need for Samsung Model Number WF45T6000A?
Article first time published onCan you transport a new washing machine on its back?
When you move your washer, first replace the shipping bolts that were originally in the back of the washer. This keeps the drum from moving inside the washer and protects it from damage. Also, make sure your washer is placed in the moving van upright. Shipping your washer on its side, front, or back can damage it.
How do I ship a washing machine?
Make sure the power, hoses, vents and water hookups are disconnected. Remove any lingering items and clean the washing machine and dryer. Secure the doors with tape that won’t leave a residue. Use bubble wrap, foam or plastic sheeting to insulate the appliance controls to prevent damage during shipping.
Does Maytag washer have shipping bolts?
The Front Load Washer Shipping Bolt Kit can be used whenever you need to move the appliance from one location to another. … The bolts attach on the rear of the appliance.
How many shipping bolts does an LG washer have?
Note: This product has to be paired with the 4011FR3159E 4.75 inch shipping bolt (x2) for a total of 4 bolts on most LG washers.
Where are the shipping bolts located on a Samsung washer?
Your Samsung Front Load Washing Machine comes with shipping bolts inserted into the back of the machine to keep the tub secure during transportation.
How heavy is a washer?
TypeAverage Weight (pounds)Top-Loading washing machines135Front-Loading washing machines205Standard dryers124Washer and dryer combos185
What does stackable washer mean?
A stackable washer-dryer is a good option for those looking for full-service laundry capabilities, but with limited space. Also known as a laundry center, the stackable washer-dryer is a configuration in which the dryer stands on top of the washer, rather than next to it.
What happens if you run a washer with shipping bolts?
The shipping bolts clamp the spring suspension system into a locked position and hence prevent it from being damaged during transit. If you don’t remove them, it will have no suspension system so will vibrate VERY badly when you run it. It will likely be pretty noisy.
Do LG washers have shipping bolts?
The first are for shipping bolts attached to the rear of your washing machine. If the bolts are still there, remove them by using the wrench provided with your washer. Loosen the bolts by turning them counterclockwise. … LG front load washers are shipped with a foam block in the base to support the tub during shipping.
How do you move a Maytag front load washer?
Transporting your washer: Disconnect drain hose from drain system and from back of washer. Unplug power cord. Place inlet hoses and drain hose inside washer drum. Bundle power cord with a rubber band or cable tie to keep it from hanging onto the ground.
