When should gas logs be replaced

Generally speaking, you can get a good ten to fifteen years of use before you need to replace your gas fireplace.

How do you know when to replace gas logs?

If that’s the case with yours, depending on usage, they can begin to fade in appearance over tine, and likely need to be replaced every 2-3 years. However, most gas logs these days are ceramic, and they tend to last a big longer as they are extremely durable and resistant to extremely hot temperatures.

What is the lifespan of a gas fireplace?

The normal life expectancy for a gas fireplace varies, but it’s been our experience that most fireplaces need to be replaced somewhere between 15-25 years.

How long should gas logs last?

Type of gas logs: A well maintained vented log set with ceramic logs will last a very long time, in some cases 10 or more years. A well maintained ventless log set with ceramic logs can also last a long time, but, if heavily used, will begin to wear in 3-5 years.

Do gas logs go bad?

The lifespan of your gas logs will vary depending on their design, the quality of their construction, and how often you use the fireplace. With proper maintenance, a vented set of ceramic logs can last ten years or more. Unvented logs have an average lifespan of three to five years.

Can you replace gas logs?

Replacement gas logs can be used in the event that your current gas log set is old and worn out but the burner is still in good working condition.

Can you use a gas fireplace without logs?

You can use a gas fireplace without logs because the heat source is the burner connected to your gas line. Don’t use wood in your gas fireplace, as they weren’t built for wood to be their fuel source. Instead, use a ceramic log in your fireplace for additional reflective heat.

Can you replace gas fireplace logs with glass?

Fireplace glass is a dazzling alternative to gas logs. Not only is it a hassle-free fireplace option, it creates a mesmerizing flame presentation that can be enjoyed in both indoor and outdoor fireplaces and fire pits.

Why do my gas logs keep going out?

Drip Loop: moisture in the gas line can cause a failure in the drip loop. This could be the reason why your fireplace won’t stay lit. Moisture can dilute the natural gas, so you’ll want to have a professional see if this is the problem at hand.

Why do my gas logs turn black?

Soot buildup is commonly caused by clogged burner ports and improperly positioned fire-logs. … Another primary cause of soot is clogged gas burner ports. It creates an unbalanced or incomplete burn, allowing soot to form on the doors and logs. If this happens, you’ll need to clean off the fire-logs and doors.

Article first time published on

What does it cost to replace a gas fireplace?

Most units fall between $400 and $4,000 when including basic installation prices — though costs can run much higher. Depending on the type of fireplace you choose, the total cost of installation can reach anywhere from $2,300-$10,000 at the high end.

Can you update a gas fireplace?

You can improve the appearance of your fireplace by switching the current logs for a new set that provides a more appealing look. … Modern gas fireplaces aren’t limited to realistic looking logs, however. Glowing faux embers and a bed of coal are among the enhancements that can give your gas fireplace a nice upgrade.

Do gas fireplaces require maintenance?

Gas fireplaces are easy and convenient. So much so, that it’s easy to forget that even a gas fireplace needs upkeep every once in a while. To keep your gas fireplace operating safely and in tip-top shape, it’s recommended to perform annual maintenance.

Why are my gas logs smoking?

The most common causes of soot buildup in a gas fireplace are ceramic fire-logs that have been moved out of proper position and burner ports that are clogged. … The other main cause of soot is clogged ports on the gas burner, which causes an incomplete or unbalanced burn and formation of soot on the logs and doors.

Why does my gas fire make a popping sound?

It isn’t uncommon to hear certain noises like popping and clicking in the first few minutes after turning on the fireplace. Such sounds are nothing more than the metal components expanding as they warm up, and should disappear within several minutes.

Are gas fireplace logs toxic?

Just like real burning logs, both types of gas logs produce carbon monoxide — a toxic gas that can be lethal — when they burn. Venting and proper use of a gas fireplace can help keep CO at a safe level.

Are old gas fireplaces safe?

When the combustion gases from a gas log fireplace come back into the house, it’s not nearly as obvious; in fact, it could be very easy to miss. These gases can contain high levels of carbon monoxide, making this a safety hazard.

Can I install gas logs myself?

Gas log installation should only be done by a certified professional. Homeowners should never install their own gas logs unless they have the tools and training to do so.

Can gas fireplace logs catch fire?

Ventless gas logs are safe, so long as you use them properly. After no more than an hour of burning a ventless gas log system, you need to crack a window or two to replenish the oxygen in your home. … For this reason, ventless gas logs are not permitted in some states, including California, and certain cities.

How can I make my gas logs more realistic?

Use vermiculite instead. You can find rock wool, silica sand, vermiculite and crackling ash granules at a fireplace supply store or order online. You may need to turn the fireplace off and shift the rock wool around until it resembles a realistic pile of embers.

What are fake logs in gas fireplaces made of?

What are Gas Logs Made of? Gas logs are typically made of ceramic fibers, refractory ceramic, or refractory cement. Each of these composites is designed to withstand high heat and resemble real wood as closely as possible. Manufacturers use molds of actual wood to create a realistic look.

Should I leave pilot light gas fireplace?

We recommend that you turn off your gas fireplace pilot light seasonally. Turning off your gas fireplace’s pilot light can save a substantial amount of energy and money. It is important to remember that not all gas fireplaces have “standing” pilot light, or, a pilot light that is “always on”.

Does gas turn off when pilot goes out?

This is because all modern gas appliances with pilot lights have a fail-safe device that closes off the gas to the appliance in the case when the pilot may go out. … If the pilot light goes out for any reason, the current stops, the valve closes, thus preventing any gas from leaking.

How do you fix a gas fireplace that keeps going out?

1. Before You Begin: Is Your Pilot Light Lit Inside Fireplace?
2. The Fix: Pilot Light to Gas Fireplace Won’t Stay Lit.
3. Check Your Thermopile Output with the TH/TP Contacts.
4. Don’t Replace Your Thermopile or Thermocouple Right Away.
5. Cleaning the Thermopile.
6. Re-test the Cleaned Thermopile.

Can gas logs be washed?

You should never wash your gas logs. If you want to clean them on your own should take them out of the fireplace one by one, very carefully as to not damage them, and take them outside. I recommend cleaning them using a vacuum to clean them, although a brush with soft bristles would work as well.

Why is there glass on my gas fireplace?

Safety. Efficiency isn’t the only benefit of a glass-fronted fireplace. The fact that they are airtight and sealed means that the room is safe from exhaust fumes. All Escea gas fireplaces are all glass fronted because this is the only way to seal the combustion area of the fireplace.

Can I put rocks in my gas fireplace?

You can add lava rocks before or after you add the logs. Use lava rocks to pour on the base of your fireplace and around your burner pan.

Do gas logs leave soot?

Soot on vented gas logs is nothing to worry about. It is a natural occurrence when the yellowish flames of a gas log impinge on a rough surface. Some people like the look, some don’t. If you don’t, we suggest that you VERY CAREFULLY take the logs outside and brush the soot off with a whisk broom.

How do you arrange fake gas fireplace logs?

1. Place the largest ceramic logs on the bottom to serve as the foundation for the fire. …
2. Leave 2 inches (5 centimeters) between logs.
3. Make sure none of the logs is blocking the gas flow. …
4. Arrange smaller logs on top of the foundation logs.

What color should flames be on a gas fireplace?

Proper Flame Colour A gas fireplace should burn flames that are blue, perhaps with very small tips in yellow or orange. The flames should be steady and consistent no matter what. Although, there is a small exception.

Do plumbers fix gas fireplaces?

Yes, plumbers can help you with anything related to propane or gas. They may specialize in drains or anything related to water, but they often are both qualified and experienced enough to install and repair gas fireplaces professionally.