What size does lvl come in

LVL is available in lengths up to 24.4 m (80 ft), while more common lengths are 14.6 m (48 ft), 17 m (56 ft), 18.3 m (60 ft) and 20.1 m (66 ft). LVL can easily be cut to length at the jobsite.

What widths do LVL beams come in?

Sizes may vary according to manufacturer but Georgia Pacific says LVL standard thicknesses are 1 3/4 inches and 3 1/2 inches. Lengths are generally available in 24, 28, 32, 36, 40 and 44 feet with special orders of up to 60 feet.

How wide is a 14 LVL?

Weight89.60 lbsDimensions1.75 × 14 × 168 inThickness1-3/4″Width14″Length14′

What size LVL are available?

However, LVL is also available in nonstandard sizes like 9 1/2 and 11 7/8 inches all the way up to 24 inches deep. You will find that the deeper 9 1/2-inch and 11 7/8-inch versions carry a little more load than the 9 1/4-inch and 11 1/4-inch stock, but that’s not why distributors push nonstandard depths.

How wide can a LVL beam span?

Due to its strength, an LVL beam can span up to 60 feet and is much stronger than traditional lumber. Generally, you can find LVL beams in 4-foot increments starting at 24 feet and going up to 44 feet long, with special orders up to 60 feet. LVL beam thickness is usually between 1 ¾ and 7 inches.

Is glulam the same as LVL?

A glulam beam looks like a stack of 2 x 4s (or larger lumber) glued together on their broadsides. This is in contrast to other engineered members, such as LVL (laminated veneer lumber) and Microlam beams, which look like very thick plywood, with very thin layers of wood glued together to form a thicker mass.

How big of a LVL beam do I need?

Design a beam width based on the fact that the typical width of an LVL beam is 1 3/4 inches. The width can be increased by laminating in multiples of 1 3/4 inches. Beam width should be 1/4 to 1/3 beam depth.

What are LVLS made from?

Laminated Veneer Lumber is a high-strength engineered wood product made from veneers bonded together under heat and pressure. It is used for permanent structural applications including beams and rafters. Laminated Veneer Lumber (LVL) is a high-strength engineered wood product used primarily for structural applications.

What is the difference between LVL and plywood?

In general, LVL production is similar to that of structural plywood; however, the main difference between the two products is the grain orientation of each veneer.

What is LP LVL?

LP® SolidStart® LVL (Laminated Veneer Lumber) is a strong, straight and durable framing product made for superior performance. It can be used in place of traditional lumber for greater consistency and design flexibility. Advantages include: Protection: SiteCote™ water-resistant coating protects during construction.

Article first time published on

How much does an 18 inch LVL weight?

Weight of LVL (Laminated Veneer Lumber)Width in InchesDepth (Height) in Inches↓1/4 inch18″1 inch0.07 lbs5.131-3/4″0.13 lbs8.97

What is the cost of LVL beams?

TypePer Foot InstalledTotal Cost InstalledLVL Beam$50 – $200$800 – $2,500Steel I-Beam$100 – $400$1,200 – $4,200

What is a Microlam beam?

A microlam, sometimes called a lam beam or laminated veneer lumber (LVL), is a type of engineered timber. … Common uses include carrying beams, joists, and headers. The way microlam is made is the secret to its strength. Like plywood, thin sheets of wood are glued together to create beams.

How far will a 2x12 LVL span?

A 2×12 with an E of 800,000 psi and Fb of 790 psi also works, since it can span 15 feet and 10 inches. Given a design span of 15 feet 1 inch and a 16 inch joist spacing, first determine which size lumber will work.

Is LVL stronger than dimensional lumber?

Laminated veneer lumber (LVL) studs can be two times stronger in compression and tension than standard framing lumber of the same dimension.

Do LVL beams sag?

Your wood/LVL will sag much more. What you are describing is ultra typical when there is a point load above and they used LVL. I don’t know why cities keep allowing the use of LVL for anything more than 10 feet. It will look great and then year 2-3 it starts sagging… year 4-5 you get cracks and notice it…

How big of a beam do I need to span 20 feet?

Wood beam size for a 20 foot span:- as per general thumb rule, for a 20 foot span, size of wood beam or lumber joist should be 2×14 which placed at 16″ apart from centre used for residential building or projects or construction in which depth of section of beam is 350mm (14″) and width of beam is 50 mm or 2″.

How far can a 2x6 LVL span?

2-grade 2×6 joists can span up to 10 feet 9 inches from beam to beam when spaced the standard 16 inches apart with a maximum live load of 30 inches per square foot.

How do I determine what size beam I need for a load bearing wall?

Multiply the loading per square foot by the area in square feet of the surface which the beams will be supporting. Divide by the number of beams which will be installed to get the loading per beam.

What is the strongest engineered wood beam?

Power Beam® – 3000Fb – 2.1E – 300F Power Beam® is the strongest engineered wood product (EWP) on the market with design values of 3000Fb – 2.1E – 300Fv.

Is LVL and Microlam the same?

Microllam is a brand name for Laminated Veneer Lumber (LVL) Beams manufactured by Weyerhaeuser. LVL beams are one of several different types of engineered lumber products on the market today.

Can LVL beams be drilled?

Whenever possible, avoid drilling vertical holes through LVL beams unless the beam width is at least 3-1/2 inches. Prior to drilling any vertical holes, an engineer or architect qualified in wood design should be consulted.

Where are LVLS made?

The main raw material used to produce LVL is wood veneer of various grades and it has been used structurally for several years in Northern America and in many European countries. At present, there is only one manufacturer of LVL in Australia – Wesbeam!

Is LVL waterproof?

LVL is made from rotary-peeled veneers that are bonded together under heat and pressure into large panels that are cut into range of widths. Phenol-formaldehyde resins provide waterproof bonds.

What is LVL similar to?

LVL is a type of structural composite lumber, comparable to glued laminated timber (glulam) but with a higher allowable stress.

Are LVL beams treated?

With LVL now being offered with pressure treatment, it is approved for outdoor decks. This offers the professional deck builder the ability to eliminate the waviness that can occur in traditional lumber framed decks.

What thickness does LVL come in?

The most common thickness of LVL is 45 mm (1-3/4 in), from which wider beams can be easily constructed by fastening multiple LVL plies together on site. LVL can also be manufactured in thicknesses from 19 mm (3/4 in) to 178 mm (7 in).

What is the difference between LSL and LVL?

LSL is typically less expensive than other engineered wood beams. Due to its high allowable shear strength, LSL beams have the capacity for larger penetrations than other engineered wood beam options. … Laminated Veneer Lumber (LVL) is a commonly available engineered product that is manufactured similarly to PSL.

Are LVL beams heavy?

They are a dense, high-strength laminated veneer lumber made of wood and glue, which are available in many different sizes. … The logistical benefits of LVL beams become clear when considering alternatives like glulams or steel beams, which are heavy and cumbersome.

Can you rip a LVL?

But what about ripping LVL? A. … LVL is made in billets up to 48 inches wide that are ripped to commercially available standard depths. It’s okay to rip LVL beams to a smaller depth, too, though you’ll have to recalculate the beam capacity.