What is thermoset single ply roofing

Thermosets. Thermoset roof systems are typically EPDM (ethylene propylene diene monomer) rubber

What is a thermoset roof?

EPDM membranes are chemically cross linked that once cured can be bonded to similar materials with adhesives. EPDM membranes are characterized by: Widths of 7.5′ to 50′ Thicknesses of 45 and 60 mils.

What is single ply roofing made of?

Single-ply roofing materials are either thermoset, or thermoplastic. EPDM is a thermoset while PVC and TPO are thermoplastics. There are advantages and disadvantages to each type. Thermosetting plastic can be very resistant to high temperatures, allow for flexible design options, and can be cost effective.

What does single ply roofing mean?

What is Single Ply Roofing Membrane? Single ply is a flat, synthetic polymer based roofing material that, as the name suggests, provides a waterproofing layer in a single sheet. Usually supplied in rolls, the material is either entirely homogeneous or contains a reinforcement layer.

How long does a single ply membrane roof last?

The quality of single ply roof membranes Using the highest quality raw materials, means that single ply membranes are incredibly long lasting. These normally have a life expectancy of between 25 and 40 years which is in line with the service life of the building.

What is the primary difference between thermoset and thermoplastic membranes?

THERMOSET AND THERMOPLASTIC: ALL ABOUT HEAT The material difference between the two is that thermoplastics have a lower melting point and can be heated and melted again, while thermoset plastics can withstand higher temperature without deformation and remain in a permanent solid state.

Which type of single-ply membrane is the most commonly used thermoset roof?

Thermoset membranes are compounded from rubber polymers. The most commonly used is EPDM [ethylene propylene diene monomer].

Is EPDM the same as single ply?

Ethylene Propylene Diene Monomer is a single-ply membrane that consists of a synthetic rubber compound that allows it to be flexible.

Is single ply roofing good?

A single-ply roofing system is an excellent solution for building owners looking for a material that has good durability and longevity while still being cost-effective.

How thick is a single ply membrane?

The thickness of single ply membrane is in the range 1.1mm to +2mm. Some products are homogenous, others are reinforced with glass fibre or polyester, depending on the application. Membranes are sealed at joints to form continuous waterproofing.

Article first time published on

What is the difference between TPO and EPDM?

EPDM has a dark surface, which in summer conditions will absorb heat, forcing cooling systems to work overtime, whereas TPO roofing reflects sunlight, allowing commercial air conditioners to work more efficiently. TPO also has a somewhat higher resistance to punctures than EPDM.

What types of single-ply roofing membranes are available?

Ethylene propylene diene terpolymer (EPDM): a thermoset.
Polyvinyl chloride or polymerized vinyl chloride (PVC): a thermoplastic.
Thermoplastic polyolefin (TPO): a thermoplastic.

How much does a membrane roof cost?

Membrane Rubber Roofing Prices. Expect to spend anywhere between $3.25 and $14.00 per square foot for material and installation. However, it will usually average between $4.50 and $5.50 per square foot. Rubber Roofing Contractors tend to charge between $75 and $90 per hour on top of materials.

What is the lifespan of a roof?

Your asphalt roof is about 20 years old The life of a roof is how many years you get out of it. For a standard 3-tab asphalt shingle roof, that’s 25-years. As long as your roof has been properly ventilated and installed you should get pretty close to that 25 years of roof life.

Is a rubber roof better than shingles?

Rubber shingles or rolls are much stronger and less likely to crack during extreme weather conditions than asphalt roofing. They are especially beneficial for flat or low-pitch roofs that traditional shingles have trouble effectively protecting due to the lack of gravitational pull.

What is EPDM rubber roofing?

What is EPDM? Ethylene Propylene Diene Monomer (M-class), or EPDM, is a synthetic rubber that is extremely durable and used across a variety of applications. EPDM is heat and weather resistant with its two main ingredients derived from natural gas and oil, making it an ideal flat roofing material.

What is modified bitumen roofing?

Modified Bitumen (MB) roofing is an asphalt-based, close cousin of the Built-up-Roof (BUR) designed for buildings with low-slope or “flat” roof structures. … Modified Bitumen Roofing Systems are designed to withstand harsh exposure to extreme environmental elements.

What is a green roof system?

A green roof is a layer of vegetation planted over a waterproofing system that is installed on top of a flat or slightly–sloped roof. Green roofs are also known as vegetative or eco–roofs. They fall into three main categories—extensive, intensive, and semi–intensive.

What is thermoset and thermoplastic materials?

The primary difference between the two is that Thermoset is a material that strengthens when heated, but cannot be remolded or heated after the initial forming, while thermoplastics can be reheated, remolded, and cooled as necessary without causing any chemical changes.

What are the two types of EPDM thermoset membrane?

Single-ply roofing membranes fall into two classes — thermoset membranes, such as ethylene propylene diene monomer (EPDM) and Hypalon, and thermoplastic membranes, such as thermoplastic polyolefin (TPO) and polyvinyl chloride (PVC).

Is EPDM thermoplastic?

EPDM rubber belongs to the thermoset elastomers (rubber) classification, while thermoplastic PI belongs to the thermoplastics. There are 8 material properties with values for both materials. For each property being compared, the top bar is EPDM rubber and the bottom bar is thermoplastic PI. …

How are single-ply roofing membranes secured to a roof deck?

How are single-ply roofing membranes secured to a roof deck? Most single-ply roofing membranes are secured to a roof deck using fasteners and plates that are specifically meant for this type of roofing installation.

Are shingles single-ply?

The Shingle-Ply membrane provides a shingle look and the watertight performance and long-term durability of a thermoplastic, single-ply roofing system. The Shingle-Ply product is made from the same durable membrane as the Duro-Last roofing system, a proven performer since 1978.

What are the different types of commercial roofs?

Metal Roofing.
Built-Up Roofing (BUR) Membrane.
Green Roofing.
Spray-On Silicon.
Thermoset EPDM Roof Membrane.
Thermoplastic PVC & TPO Roof Membrane.
Shingle Roofing.

Which is cheaper EPDM or TPO?

EPDM roofs are the most economical choice for single ply roofing membranes. TPO roofing membranes are more expensive than EPDM. Regardless of which membrane you choose, it is better to spend more money and invest in a thicker membrane. Both EPDM and TPO roofs perform better and last longer if they are thicker.

Is EPDM the same as rubber roof?

EPDM, commonly known as a “rubber roof”, stands for ethylene propylene diene monomer and gets its name from the chemicals (monomers) that are mixed in various proportions to form it. It is most used on low-sloped or flat roofs, typically on commercial buildings.

What is the best rubber roof system?

Ethylene Polypropylene Diene Monomer (EPDM) is one of the most versatile rubber roofing options on the market. Considered to be one of the best materials for flat roofs, rubber is a popular choice for industrial and commercial applications thanks to its ability to withstand extreme weather conditions.

What is better EPDM or Fibreglass?

EPDM copes better which expansion and contraction, which also makes it more suitable for larger applications. GRP cannot be used on large roofing projects because the expansion and contraction rates can be excessive.

What is 60m TPO roofing?

TPO is a type of roofing membrane that can come in a variety of thicknesses. The most common thickness is probably 60 mils. (A mil is a unit of measure where 1-mil is equal to 0.001 inches. So, a 45-mil roofing membrane is actually 0.045 inches thick; whereas a 60-mil membrane is 0.06 inches thick, and so on.)

What is single ply waterproofing membrane?

Single Ply Systems The single ply membranes are made from flexible PVC-p (polyvinyl chloride) that offer strong resistance to tears and punctures and can withstand extreme weather conditions, whilst providing a cost effective solution to waterproofing all roof types.