What is the difference in mower blades

The easiest way to find replacement lawn mower blades is with the OEM number. The OEM number is the numerical part number of the blade assigned by the manufacturer. In most cases, just typing this number with the manufacturer name into a search engine or online store will be enough to bring up some promising results.

What type of mower blade should I get?

The easiest way to find replacement lawn mower blades is with the OEM number. The OEM number is the numerical part number of the blade assigned by the manufacturer. In most cases, just typing this number with the manufacturer name into a search engine or online store will be enough to bring up some promising results.

What is the difference between high lift and medium lift mower blades?

Blades with a higher lift require more power. Mowers that are not equipped with enough horsepower may have a hard time cutting grass with high lift blades. … Sand and dust sucked into the deck can prematurely wear the blades and equipment. Medium Lift – 3/4 in. to 15/16 in.

Whats the difference in lawn mower blades?

There are two basic types of lawn mower blades – standard blades and mulching blades. … Mulching blades, also known as 3-in-1 blades, can be used to bag, discharge, or mulch grass clippings. Mulching blades feature more curves and an increased cutting edge.

Which is better mulching blade or high lift?

Essentially, the greater the lift, the more horsepower that’s required. You would use High-Lift blades when tackling taller, more dense grass (High-lift = higher-lifting airflow). You should not use Lifting blades for mulching.

What size blade do I need for my lawn mower?

If your lawn is under half of an acre you can go with a push or self-propelled walk-behind mower with around 20-22 inch blades. While any lawn bigger than half an acre will require you to get a riding mower that has a blade width of 28-46 inches.

How do I know what size mower blades I need?

Length should be measured from cutting tip to cutting tip, diagonally across the blade.
Type of Center Hold: Circle, 5 / 6 / 7 point star, hourglass or “Double D”
Center diameter should be measured directly across the center hole.
Diameter of outer holes.

Do high lift blades cut better?

Low-lift mower blades perform well on dry, shorter grasses, while high lift blades work better in ALL conditions. High-lift blades have deeper curves on the ends, which create enough suction to circulate and expel the clippings. The higher air flow also helps prevent clogging when mowing tall or wet grass.

Are all 21 mower blades the same?

So, are lawn mower blades universal? Lawnmower blades are not universal, they are mower specific. A mower blade must be an exact fit and torqued to the manufacturer’s specification.

Can you use a mulching blade on a side discharge mower?

Mulching blades are sometimes called “all purpose” or “3-in-1” blades because you can use them to mulch, bag, or side discharge. Standard blades are called 2-in-1 blades because you can use them to either bag or side discharge the grass. Can I use my current mower to recycle my grass clippings? Yes.

Article first time published on

Are Gator blades better than mulching blades?

Unlike other mulching blades that push the grass down, the high lift on a gator blade draws the grass up which in turn gives you a clean, even cut. … We do recommend a mulching kit for a single blade deck however, you will still see a much better mulching result with a Gator Blade with out the attachment.

Are mulching blades low-lift?

While low-lift blades are ideal for mulching and depositing clippings back on turf after thoroughly dicing it, they struggle with taller grass and easily clog or even stall.

How often should mower blades be sharpened?

This keeps your mower in good shape and helps to maintain a healthy lawn. However, if you mow more often, the blades will need more attention. On average, a mower blade should be sharpened after every 20 to 25 hours of use time.

How sharp should your lawn mower blade be?

Mower blades should be aggressively sharp, but not as sharp as a razor’s edge. You should be able to touch the blade with your hand without getting cut. Contrary to popular belief, a lawn mower blade with a razor sharp edge will not cut grass better.

What size blades do I need for a 42 inch deck?

2 blades are required for a 42″ cut deck. This blade replaces Poulan/Craftsman 134149 and 532134149; Husqvarna 532 13 41-49. Blade measures 21″ long by 2-1/4″ wide with a 5 point star center hole.

Are all lawnmower blades the same size?

Lawn mower blades are mower specific and not universal. … You can also replace a certain manufacturer’s blades with another manufacturer’s blade, provided that they match up with your mower in length, thickness, width, hole numbers, hole shapes, and hole sizes.

How much space do you need between mower blades?

Blades don’t physically overlap. If you put them tip to tip there should be 1/8 inch gap. You can set them 90 degrees at first but it won’t last long.

How do I know what size mower deck I have?

Lie down on the ground next to the elevated mower, and pass the tape measure beneath the blades, hooking it on the opposite side of the deck. Note the distance on the tape measure. This is your deck size.

What size blades do I need for a 54 deck?

AYP Gator Mulching 3-in-1 Blade fits 54″ Cut Decks, needs three blades. Size: Length: 18-1/2″, Center Hole: 5/8″Star, Width-thickness: 250-187. Replaces # 187254. {Blades are sold individually} If you purchase 6 of these blades you get FREE SHIPPING.

Will any lawn mower blade work?

People often want to know if lawn mower blades are universal when they go to replace them. The fact is that they are not. In fact, you must get the exact same fit and they must be made to the specifications set by the manufacturer.

Is bagging better than mulching?

Many lawn care professionals prefer to bag grass clippings during mowing for a crisp, clean look. … Mulching grass clippings provides more nutrients for your soil. As they break down, the clippings will release nitrogen, potassium, and phosphorus.

Why does my mower leave a row of grass between two blades?

A strip of uncut grass left in the middle of mowing rows could signal that your lawnmower’s blades are unbalanced or that one or both of them was installed the wrong way. … Ensure that your mower’s blades are on correctly, that both are secured tightly to the mower deck and that both are balanced.

Do new mower blades need to be sharpened?

As mentioned above, brand new lawn mower blades do not need to be sharpened because they are always sharpened during manufacturing. … However, lawn mower blades do generally need to be sharpened at the beginning of each new season.

What is a 4 in 1 mower blade?

This 4-in-1 blade 580258102is for mulching, lifting, bagging and shredding the grass clippings.

Is it better to side discharge or mulch?

If you are simply looking for a quick cut, the side discharge method is likely the way to go. It won’t look as neat and clean as bagging, but it will take substantially less effort. If you’re looking to really give your lawn a new life and get more vibrance out of your grass, mulching may be the way to go.

What's the difference between side discharge and mulching?

Both side-discharge and mulching mowers leave grass blades behind. However, a mulching blade chops up clippings into finer pieces so they decompose faster and don’t clump as quickly. Using a side-discharge mower you may need to do your own mulching by running over your grass piles multiple times.

What makes a lawn mower a mulcher?

In order to do its mulching magic, a mulching mower needs to cut grass clippings more than once. In order to accomplish that task, it is equipped with a blade designed with curves and bends that create a recirculating air flow that moves the clippings across the blade repeatedly.

Are Copperhead mower blades any good?

They fit just fine and really cut the grass nicely. They were easy to install and do a nice job of mulching the grass into smaller pieces. If you’re looking for replacement blades for your D105 or like, these will work fine and do the job. I will be buying them again when these wear out.

Can you use gator blades with side discharge?

they are great for both side discharging and bagging. i do have a set of gators for my 36″ i use in the fall for leaves but use high lifts for the the 52″ all the time.

Can you sharpen Gator Blades?

The teeth on the Gator Mulcher do not cut the grass, so sharpening them isn’t required. Simply sharpen your GatorMulcher as you would any standard mower blade.