What is the best wood to build a deck

Overall, our experts at Patio Productions recommend Cedar or Redwood as the best wood choice for outdoor decks. If you’re looking for a cheaper option, pressure treated wood is your next best option.

What materials do you need to build a wood deck?

Measuring and Layout Tools. …
Framing Squares and Speed Squares. …
Excavation Tools. …
Shovels. …
Pipe and Squeeze Clamps. …
Wrenches and Pry Bars. …
Fastening Tools. …
Nail Gun with Compressor.

What size lumber Do I need to build a deck?

For the deck surface, you can use 2x4s, 2x6s, or 5/4x6s. The 5/4 decking (pronounced “five-quarter”), available in cedar and pressure-treated fir, is 1 inch thick and 5-1/2 inches wide with rounded edges that make for a splinter-free surface. Cedar 1x lumber usually has one rough side and one smooth side.

Should I use deck boards or 2x6?

2×6 is thicker and is stronger, but is also more expensive. Spacing between deck boards provide a few critical functions. The primary function is to drain water from the deck. Gaps that are narrow (1/8”), can catch debris, specifically on top of the joists, and can be difficult to clean out.

How thick should deck boards be?

NOTE: Standard boards are often called a 5/4 board when referring to traditional lumber, which means the actual thickness is typically somewhere between 1” and 1 ¼”. Thicker boards are often called a 2 x 6 when referring to traditional lumber, which means the actual thickness is somewhere between 1.2” and 1.5”.

How many joists do I need for a 12x12 deck?

For example, a 12-foot x 12-foot deck of 5/4 x 6 pressure treated wood decking on 16 inches on center spacing of joists will require: A 12-foot long deck with joists 16 inches on center will require 10 joists.

Should deck joists be 2x6 or 2x8?

For upper-level decks, 2×10 is recommended as the minimum size to use for strong guard post connections. 2×6 joists should only be used on ground-level decks that do not require, and will not provide for, any guards. … Most decking is not strong enough to support longer spans than 16″.

What is the most common deck board size?

The most common or standard deck board width is 6-inch wide planks based on square-foot coverage, labor, and material cost.

How many boards do I need for a 12x12 deck?

You will need 18 boards of 2-by-6-inch lumber or nine 2-by-10 inch boards to build the joists, also known as the beams. You should purchase an additional 25 percent wood to allow for framing pieces and waste.

Should you leave a gap between deck boards?

Proper wood deck board spacing should have at least a 1/8 inch gap after the decking has dried out. If you install your wood or treated deck boards while they are still wet boards, then they should be attached without a gap between them.

Article first time published on

How do you stagger deck boards?

A common method for staggering a deck is to start the first row with a full plank, then cut one-third of the next row’s first board off the end. The row after that has an additional one-third cut off and then repeat when you get back to a full board.

Do I need pressure treated wood for deck?

It’s better to use treated lumber and know your deck will be secure in a few years than try to use untreated wood for the supports and watch them rot away rapidly. … Pressure treated wood doesn’t release any gases or particulates that could harm you and your family.

How much does it cost to build a 20x20 deck?

The average homeowner spends $2,200 to build a 10×10 foot deck, $6,160 to build a 14×20 deck, and $8,800 to build a 20×20 deck. The cost to build a deck with pressure-treated wood, hardwood, or composite is about $25 per square foot, for both materials and installation.

Can I use 2x8 for deck joists?

2×8 for joists will be fine, with 16″ OC. Should use 2×10 for beams but 2×8 will be fine as well. If you are worried you can triple the 2×8 for the beams but double will be sufficient. You should put the beams at 7 and 14 feet out from the house, with the piers you should do 3 per beam with spacing of 1, 7, 13.

Can you use 2x10 for deck boards?

Editor’s Comment’s: There is certainly no problem using the 2x10s for any of the structural framing of the deck. Using 2×10 treated lumber for decking is another matter entirely.

Can I use 2x4 for deck joists?

The short answer is yes. 2x4s can work for deck joists. However, they aren’t ideal for spanning long distances without bending or breaking, so you have some limitations. Choosing 2x4s for a low-sitting deck is perfect for keeping your feet out of the mud.

Can I use 1x4 for decking?

Width of material: We recommend only 1×4, 5/4×4 or narrower boards. Never use 1×6 or 5/4×6 material in close to ground applications. Spacing between boards: You must allow space for your deck boards to expand when they take on moisture, as they will inevitably do when exposed to wet weather, rain or high humidity.

How far can a 2x8 span for a deck?

Using this rule, a 2×6 will span 9 feet, a 2×8 will span 12 feet, and a 2×10 will span 15 feet. As you can see, the larger the depth, the longer the span.

How many joists do I need for a 16 foot deck?

For example, when you space joists 16″ apart — which is standard for residential decks — a deck spanning 9 1/2′ would require 2-by-6 joists, a 13′ deck would need 2-by-8 joists and a 16′ deck calls for 2-by-10 joists.

Can I use 2x8 for deck boards?

Q: Can I use 2×8 treated lumber as deck boards? A: No, that’s a not a good idea. Lumber wider than 6 inches should not be used as a flat surface. Wide, flat boards have a tendency to pool rain water, which can lead to cupping problems.

Can you use 4x4 for deck joists?

For most decks, 4×4 lumber is strong enough for structural posts. If a deck is raised more than 6 feet above the ground, codes may require 6×6 posts.

How far should posts be on a deck?

Layout and Footing Locations In general, posts should be spaced no more than 8 feet apart. Some builders position them every 4 feet for a completely rigid frame. The maximum distance between footings is determined by the size of your joist material.

How many footings do I need for a 12x16 deck?

A standard deck will need four footings parallel to the house, but they will need to be temporarily braced by 6 inch-by-6 inch posts. Using doubled boards, you will then need to build beams on the top row of the posts to frame the edges of the deck. These must be topped with adjustable post caps.

How many deck blocks do I need for a 10x10 deck?

For example, a 10 x 10 floating deck needs four-deck blocks. Four deck blocks can hold 8 000lbs, almost twice the support necessary for a 10 x10 deck.

What is the cheapest way to build a deck?

Choose wood, but carefully: Untreated wood decks are generally the cheapest to install, but don’t forget long-term costs. Wood decks require yearly maintenance and deteriorate quickly if they don’t get it.

Is it better to nail or screw deck boards?

The Consensus: For a deck build it’s best to use a combination of nails and screws. … Screws are superior for laying down the decking. They hold things flush better and have a better fastener/tensile strength, which keeps boards from popping up over time.

Do you screw decking at every joist?

Each deck board should be fastened with two screws at each point where the board crosses a joist to ensure the stability and durability of your deck’s surface. Boards should be fastened to rim joists with three screws.

Does pressure treated wood shrink or expand?

Over time, most treated lumber will shrink slightly across its width as it dries out. Take this small amount of shrinkage into account when laying decking or fence boards. After being outdoors for six to 12 months, treated lumber will develop cracks, called “checks,” along the surface of each board.

How far apart are joists for a deck?

Deck joist spacing should never exceed 16″ on center (with the exception of MAX deck boards, which allow for maximum 24″ on center). For a more rigid feel, 12″ or less may be preferred. If adding additional framing, be sure to keep all boards level and in plane across the tops.

How far should deck boards overhang?

The decking should overhang the joists between ¼ and 2 inches beyond the end joists and rim board. The amount of overhang you should leave depends on your deck board materials: Most wood decks: ¼” to 1 ¾”