What is a 36mm socket in standard size

InchesMillimetersSpanner1.41736mm36mm1.4181 7/16 AF1.4807/8 Wworth; 1in BSF1.5001 1/2 AF

What is a 35mm socket in inches?

millimeterdecimal inchclosest fractional inch32mm1.26″1-1/4″34mm1.34″1-1/3″35mm1.38″1-3/8″36mm1.42″1-7/16″

What size is a 33mm socket in standard?

A 33mm metric socket is 1.29921 inches in size which most closely matches a 1 5/16 standard size socket.

How many MM is a 7 32 socket?

SAEMetricInch7/32″0.2196mm0.2361/4″0.256.5mm0.256

What size is 5/8 inch in MM?

Dimensions — Inches to Metric0.625”5/8”15.88 mm0.688”11/16”17.48 mm0.750”3/4”19.05 mm0.813”13/16”20.65 mm

Can you use metric sockets on standard bolts?

Can you use Metric sockets on SAE fasteners or SAE Sockets on Metric Fasteners? Yes, you can use some sockets on both metric and SAE sizes. However, you need to be careful, as most times they are not exactly the same, and you can strip a bolt by using an SAE socket on a metric bolt and vice versa.

What standard socket equals 35mm?

Bolt DiameterMetricStandard32mm1-1/4″7/8″34mm1-5/16″35mm1-3/8″1″38 mm1-1/2″

Is 7/8 the same as 22mm?

21mm = just over 13/16 inch. 22mm = almost 7/8 inch. 23mm = 29/32 inch. 24mm = just over 15/16 inch.

What are the standard socket sizes?

There are four common socket sizes: 1/4 inch (0.6 centimeters), 3/8 inch (0.9 centimeters), 1/2 inch (1.3 centimeters) and 3/4 inch (1.9 centimeters). In-between sizes are available too, starting with 1/4 inch (0.6 centimeters) and increasing every sixteenth of an inch (0.16 centimeters).

What are the standard socket sizes in order?

Six Point Standard Sockets (3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1) Six Point Metric Sockets (9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21) Six Point Standard Deep Sockets (1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1)

Article first time published on

Is there a 33mm socket?

Capri Tools Deep Impact Socket, 1/2-Inch Drive, 6-Point, Metric (33 mm)

What are imperial spanner sizes?

BOLT DIAMETER (INCHES)AF SPANNER SIZE (INCHES)SPANNER SIZE (MM)1/4 INCH7/16 INCH11.11 MM5/16 INCH1/2 INCH12.7 MM3/8 INCH9/16 INCH14.29 MM7/16 INCH5/8 INCH15.88 MM

What is a 16th of an inch in MM?

InchesMetricFractionalDecimalmm.0.05511.4000.0.05911.50001/160.06251.5875

What is 1/32 of an inch in MM?

Dimensions — Inches to MetricDecimal InchesFractional InchesMetric0.031”1/32”0.79 mm0.062”1/16”1.57 mm0.125”1/8”3.18 mm

Is 3/8 and 10mm the same?

It’s the same size. 3/8 is in inch and and its 10mm.

What is a 38 mm socket in standard?

Bolt DiameterStandardMetric7/8″1-5/16″34mm1-3/8″35mm1“1-1/2″38 mm1-5/8″41mm

What is a 20mm socket in standard?

20mm. Just short of 13/16 Inch.

What is 28mm in standard?

Standard SAE US Wrench/Spanner Size (inches)Metric Wrench/Spanner Size (mm)1 1/828.5829301 3/1630.16

Which is better 6 point or 12 point?

Answer: It’s true that 12-point sockets are fine for most lightweight repairs, but heavy wrenching calls for a six-point socket. A six-point socket is much less likely to slip off a stubborn fastener or round over the corners. Here’s why: (1) Six-point sockets have thicker walls, so they’re less likely to flew.

How do you tell if a bolt is SAE or metric?

Metric and SAE fasteners are measured differently and with different vocabulary. SAE nuts, bolts and screws are measured by their thread count, or TPI (threads per inch) and their length. Metric fasteners are measured by length and pitch, or the distance between threads.

How do I know what size socket I have?

Turn on the digital caliper and set it to read in inches, not millimeters. …
Close the caliper jaws until each jaw rests on one flat side of the nut on opposite sides.
Check the caliper display. …
Turn on the digital caliper and set it to read in millimeters, not inches.

What is the most common socket size?

Question: What are the most common socket sizes? Answer: Generally, the most common socket sizes are the 10mm and 36mm ones. In the SAE size, it’s around 13/32” for the 10mm ones.

How do you read socket sizes?

The size of the drive socket (the part that attaches to the socket wrench). These are always given in imperial measurements, and will usually be either 1/4″, 3/8″, 1/2″, 3/4″ or 1″.
The size of the socket head (the part that fits over or into a fastener).

Can I use 22mm Socket 7 8?

22mm = 0.866″, which essentialy is a 7/8″ socket. A 7/8″ socket will work on a 22mm lug nut, but it can feel a little loose. The other way around, a 22mm can work on a 7/8″ lug nut, but it can be really snug, which is not bad.

What is 10 mm in fractions?

Millimeters (mm)Inches (“) (decimal)Inches (“) (fraction)8 mm0.3150 ″5/16 ″9 mm0.3543 ″23/64 ″10 mm0.3937 ″25/64 ″20 mm0.7874 ″25/32 ″

How many mm means 1 inch?

One inch is equal to 25.4 millimeters.

What is the difference between metric and standard?

The most apparent difference between these two types of wrenches is the measuring system. … Standard wrenches usually use units of measurement in inches and express in its fractions such as 1/4, 5/16, 11/32, 7/16, 1/2, 9/26 inches. In contrast, metric wrenches use units such as millimeters, centimeters, decimeters, etc.

What is the easiest way to convert metric units?

To convert from one unit to another within the metric system usually means moving a decimal point. If you can remember what the prefixes mean, you can convert within the metric system relatively easily by simply multiplying or dividing the number by the value of the prefix.

How do you convert standard units?

Standard units are dimensionless. If the original list has units, the original SD has the same units. To transform a measurement to standard units, we divide the measurement (minus the mean) by the SD, which cancels the original units.