What do you use to mount a dartboard

Use a stud finder to locate a stable place to hang your dartboard. Use wood screws instead of nails because they are made to grip into the wood and provide a better hole. The threads in a screw will prevent any drooping, swaying, or falling of your dartboard.

How do you anchor a dart board?

Drill a hole in the wall barely wide enough to insert each wall anchor or the folded “wings” of the toggle bolts. …
Push or hammer each anchor into the hole so the opening for the screw faces you. …
Insert each screw through its respective hole on the dartboard mounting bracket.

Can you hang a dart board with Command Strips?

If it’s a lightweight soft-tip board, no problem. If it’s a real steel-tip dartboard, then no. Even if you used enough Command strips to get it to stay up there, eventually the combination of weight and gravity is going to pull your sticky contraption off the wall.

What do you put on wall under dart board?

A dartboard cabinet is the best wall protection for dart boards. Not only can it protect your wall, but your dartboard as well. It also offers many other benefits. It is decorative, can hold your stuff, acts as a scoreboard and protects your dartboard when not in use.

How high do you mount a dartboard?

Regulation dartboard height from the floor to the center of the bullseye is 5 feet 8 inches (1.73 meters). This measurement is recognized internationally and remains the same for both electronic and steel tip dartboards. We recommend measuring and mounting the dartboard first before measuring throw line distance.

How far do you stand back from a dart board?

The international standard distance is 9 feet, 7 and 3/8 inches (or 2.98 meters).

What is the distance from dartboard to throw line?

Setup the dartboard throwing distance to measure 7 Feet 9 and a quarter inch from the front of the dartboard to the front of the Oche (Throwing Line). The throwing distance can also be measures as 93.25 inches, 2.37 meter or 237 centimetres.

How thick should a cork be for a dart board?

The 1” thickness is what is recommended for darts.

How thick does cork board need to be for darts?

600mm) x 36” (approx. 900mm) in size and are a full 1” (25mm) thick. As many sheets as required can be butted together forming as large a backing area as needed. Non-reflective cork will eliminate glare.

How do you hang an arachnid dart board?

Choose a location to hang the board that is near an electrical outlet, and that has at least 10 feet of open floor space in front of the board. 2. Locate a wall stud, and place a mark 76 3/8” (194cm) up from the floor along the stud (see illustration above). Place another mark 16” (40.64cm) below the first mark.

Article first time published on

How much does a dartboard weigh?

A high quality bristle dartboard is at least 10 lbs. This weight combined with the force of pulling darts from the board on a regular basis makes using anchors in a dry wall seem pretty risky.

How do you stand when throwing darts?

But the best stance for playing darts is probably somewhere in the middle – with your torso and shoulders aligned and at an angle somewhere between 45-90° on to the board. Both shoulders should be level and parallel to the ground. Your front foot can stay flat and at an angle that feels comfortable at the toe line.

Why is it called the Oche?

‘Oche’ as a word meaning the throwing line that a dart player stands behind to throw his or her darts is comparatively recent, being introduced by the British Darts Organisation in the mid-1970s. The actual word is believed to be derived from Old Flemish meaning a ‘notch’ or ‘nick’.

Why is a dartboard laid out the way it is?

The numbering of a standard dartboard is designed in such a way as to cut down the incidence of ‘lucky shots’ and reduce the element of chance. The numbers are placed in such a way as to encourage accuracy. That’s it.

How do you hang a dartboard with a cork board?

Cover the cork with felt (optional) or simply hang the board backer as is. To cover with felt, apply a coat of rubber cement to the surface of the corkboard. Stretch the felt over the glue, making sure that there are no wrinkles. Once the glue dries, cut the excess felt with the utility knife or scissors.

What are dartboards made of?

Quality dartboards are still made of sisal fibres from East Africa, Brazil, or China; less expensive boards are sometimes made of cork or coiled paper.

What is a cork board used for?

A cork board is a framed section of cork backed with wood or plastic. Typically, it is used as a bulletin board, because the resilient nature of cork makes it ideal for sticking pins and tacks into.

Are bristle dart boards good?

Bristle dartboards hark back to a time of casual playing in a pub. Usually used for tournaments, these boards are best suited for those serious about darts. Contrary to their name, bristle boards are actually made of sisal or hemp. The sisal fixes itself after a dark hits it, making it a great material for dartboards.

What's the diameter of a dartboard?

The standard dimensions of the dart board are as follows: Double and treble ring inside measurement: 8mm. Bull inside diameter: 12.7mm. Outer bull inside diameter: 31.8mm.