What are the three ratchet sizes

Available with different drive sizes — 1/4 inch, 1/2 inch and 3/8 inch — to operate different size sockets.

What are the 3 sizes of sockets?

There are four common socket sizes: 1/4 inch (0.6 centimeters), 3/8 inch (0.9 centimeters), 1/2 inch (1.3 centimeters) and 3/4 inch (1.9 centimeters). In-between sizes are available too, starting with 1/4 inch (0.6 centimeters) and increasing every sixteenth of an inch (0.16 centimeters).

What are the three types of ratchets?

Ratchets generally come in three different lengths: stubby, standard and long. There are also extra-long ratchets for those who really need the added oomph to take something apart but don’t have the space to step up to a bigger drive size or use a power tool.

What are socket sizes in order?

Six Point Standard Sockets (5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16) Six Point Metric Sockets (8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21) Six Point Metric Deep Sockets (8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19) Hex Bit Standard Sockets (5/32, 3/16, 7/32, 1/4, 5/16, 3/8)

What size ratchet is most common?

⅜-inch drive size sockets are the most common and most available.

What size is a 33mm socket in standard?

A 33mm metric socket is 1.29921 inches in size which most closely matches a 1 5/16 standard size socket.

What are ratchet sizes?

Available with different drive sizes — 1/4 inch, 1/2 inch and 3/8 inch — to operate different size sockets. Most operate with a geared drive; those with a higher tooth count let you operate the tool with a smaller swinging motion, which is useful when there’s little room to move the handle.

What is a 3/4 socket in metric?

Bolt DiameterMetricStandard3/8″14mm9/16″7/16″16mm5/8″1/2″19mm3/4″9/16″21mm13/16″

Is a 19mm socket the same as 3 4?

19mm = 3/4 inch. 20mm = 25/32 inch. 21mm = just over 13/16 inch. 22mm = almost 7/8 inch.

What is the most common socket size?

Question: What are the most common socket sizes? Answer: Generally, the most common socket sizes are the 10mm and 36mm ones. In the SAE size, it’s around 13/32” for the 10mm ones.

Article first time published on

How do you read socket sizes?

1. The size of the drive socket (the part that attaches to the socket wrench). These are always given in imperial measurements, and will usually be either 1/4″, 3/8″, 1/2″, 3/4″ or 1″.
2. The size of the socket head (the part that fits over or into a fastener).

What are the four socket drive sizes?

These drive fittings come in four common sizes: 1⁄4 inch, 3⁄8 inch, 1⁄2 inch, and 3⁄4 inch (referred to as “drives”, as in ” 3⁄8 drive”).

How do I know what size ratchet I need?

1. 1/4 inch – Used for smaller sockets and precision work. …
2. 3/8 inch – The middle sized, and in my opinion, most useful size for general use on a car. …
3. 1/2 inch – 1/2″ sockets are generally used for nuts and bolts from around 10mm and up.

Whats bigger 3/8 or 1/2 socket?

If your socket set is limited to one drive size, choose 3/8-inch drive to cover the majority of sockets you will use. … Large, ½-inch drive sockets can handle more torque and are ideal for larger fasteners that require a longer ratchet or breaker bar to loosen or fully tighten.

Is a 72 tooth ratchet good?

The main reason why a 72-tooth ratchet will be the better call for the vast majority of applications comes down to the issue of durability.

What is a 3/8 socket in MM?

SAEMetricInch3/8″0.37510mm0.39413/32″0.40611mm0.433

Is there a 33mm socket?

uxcell 3/4-Inch Drive by 33mm Deep Impact Socket, 6-Point, Cr-V, Metric.

What is the standard equivalent to 36mm?

InchesMillimetersSpanner1.41736mm36mm1.4181 7/16 AF1.4807/8 Wworth; 1in BSF1.5001 1/2 AF

What is 33mm in SAE?

Standard SAE US Wrench/Spanner Size (inches)Metric Wrench/Spanner Size (mm)1 1/431.7532331 5/1633.34

Do they make a 20mm socket?

Your toolbox isn’t complete without the 3/8-in Drive 20mm 6 Point Metric Shallow Socket. This Socket comes with large size markings and a rust resistant coating.

What is same as 19mm socket?

19mm is 3/4 inch. just a . 05mm difference…. 11mm is 7/16 inch.

What is the same size as a 10mm socket?

So what is a 10mm socket equivalent? The equivalent imperial size of a 10mm socket is a 3/8 socket. Imperial sizes are known as SAE (Society of Automotive Engineers) or Standard.

What size is 10mm?

MMApproximate Size In InchesExact Size In Inches10mmLittle over 3/8 Inch0.39370 Inches11mm7/16 Inch0.43307 Inches12mmJust short of 1/2 Inch0.47244 Inches13mmLittle over 1/2 Inch0.51181 Inches

What is 28mm socket in Imperial?

1.105 inches = 28mm often used as a substitute for 5/8 inch whit (actually .

What is a 10mm socket used for?

For those of you who are non mechanically oriented, the 10 mm socket is probably the most used, most popular metric sized socket around for many medium sized nuts and bolts.

Is there a 10mm socket?

In fact, the 10mm socket is one of the most commonly used metric size sockets of all. It’s no secret that the majority of parts under the hood and in the car require a 10mm. The applications may vary from car to car, but the 10mm is absolutely vital to complete a project.

How many types of sockets are there?

There are four types of sockets available to the users. The first two are most commenly used and last two are rarely used. Processes are presumed to communicate only between sockets of the same type but there is no restriction that prevents communication between sockets of different types.

What is the outside diameter of a 3/4 socket?

Item #DiameterTip Outside Diameter18774793/4″1-1/16″ / 27mm188233213/16″1-3/16″ / 30mm18774807/8″1-3/16″ / 30mm188233315/16″1-1/4″ / 32mm

How much torque can a 3/8 ratchet handle?

The maximum recommended torque for a 3/8 in. ratchet handle is 1800 lbs.

What is torque wrench drive size?

The torque wrench’s drive size describes the bits you can use to tighten nuts and other fasteners. The standard sizes include 1/4 inch, 3/8 inch, 1/2 inch, 3/4 inch, and 1 inch, though you won’t be working with anything above a 1/2-inch drive for most applications.

What is the difference between a ratchet and a socket wrench?

Ratchets. A ratchet is a mechanical device that only allows movement in one direction. When it is equipped onto a wrench, it allows the user to set two turning directions: one where the wrench head is fixed and one where it spins freely. … In fact, many may assume that a ratchet wrench is automatically a socket wrench.