What are the dimensions of a category 1 3 point hitch

CategoryHitch pin size119 mm (3/4″)22.4 mm (7/8″)225.5 mm (1″)28.7 mm (1 1/8″)331.75 mm (1 1/4″)37.4 mm (1 7/16″)445mm (1 3/4″)51 mm (2″)

What are the dimensions of a category 1 hitch?

CategoryTractor PowerTop link pin diameter120-45 HP3⁄4 in (19 mm)240-100 HP1 in (25 mm)380-225 HP1 1⁄4 in (32 mm)4More than 180 HP1 3⁄4 in (44 mm)

Are all 3 point hitches the same size?

But three-point hitches are not all created equal. And they vary greatly in size, matched to the strength of the tractor on which they’re installed. We divide three-point hitches into five categories, labeled 0 through 4.

What is the difference between a Cat 1 and Cat 2 3 point hitch?

Category 0 Hitch For tractors with up to 20 horsepower. Category 1 Hitch For tractors with 20 to 50 horsepower. Category 2 Hitch For tractors with 50 to 90 horsepower. Long days can seem even longer when you aren’t comfortable.

How wide is a 3 point hitch?

Category 2Category 3Lower link hole diameter28.70 mm (1.13 in.)37.34 mm (1.47 in.)Lower hitch point Span (1)825 mm (32.48 in.)964.95 mm (37.99 in.)Width of ball (2)44.96 mm (1.77 in.)44.96 mm (1.77 in.)Pin centerline – Lower to upper (3)610.11 mm (24.02 in.)685.04 mm (26.97 in.)

What is a Category 3 hitch?

Category 3 hitches are found on tractors of 80 hp to 225 hp and have top link pins that measure 1-1/4″ and lift arm pins of 1=7/16″. The spacing of the lift arms is about 38″. … Category 3 tractors are beyond what most homesteaders will have, but if you do be aware of the the difference between the cat.

What is considered a Category 1 tractor?

Category 1 is very, very common and typically you’re gonna see Category 1 on tractors under about 50 horsepower. The back of this B-series tractor here is a Category 1 hitch. … This is typically used on tractors between about 50 and 150 horsepower or so, although there are always gonna be some exceptions in those ranges.

What is a 3 point quick hitch?

This 3-point quick hitch is used for the easy attachment and release of 3-point implements and equipment. The lift arm spacing on this category 1 tractor hitch is 27-1/4 in. The distance between the lift arms and the top link is adjustable and ranges from a minimum of 15 in. to a maximum of 18-1/4 in.

How does a 3 point linkage work?

A three-point hitch attaches the implement to the tractor so that the orientation of the implement is fixed with respect to the tractor and the arm position of the hitch. … This gives the tractor more usable traction than it would otherwise have, given the same power, weight, and fuel consumption.

Will CAT 1 implements fit Cat 2 tractor?

If you wanted to stay with your current cat 1 implements, probably should have bought a cat 1 tractor. As 56FordGuy said, you have to be careful using cat 1 implements behind a cat 2 tractor. They typically just are not built to take the stresses that a cat 2 tractor can put on them.

Article first time published on

How much weight can a three point hitch lift?

Category 1 3-point hitch for maximum implement versatility. Category 1 hitch allows quick hookup of 3-point hitch implements, especially when equipped with the iMatch™ Quick Hitch and/or iMatch AutoHitch™. The lift capacity of the 3-point hitch is 1356 pounds (615 kg) measured at 24 in. behind the hitch balls.

How do you determine top link length?

Top link. How to determine the best overall working length for your hydraulic top link is to get the true mid stroke pin-pin distance. The best way to do this is to have your tractor hitched up to your box blade (as an example) have the implement level with the ground front-back and side-side.

How wide is a Category 2 quick hitch?

Category 2 Standard Quick Hitch. For Tractors up to 150 HP. Minimum implement connection width 32″.

What is a Category 4 drawbar?

This Category 4 adjustable swinging drawbar allows 2-in. pin size (anti-rotational square-head design) with a maximum static vertical load of 4900 lb. Applications for Category 4 drawbar include: large-sized, heavy-load drawn chisel plows, field implements, or maximum-loaded grain carts.

What is a Category 4 hitch?

Class 4 trailer hitches are commonly mounted on full-size pickup trucks and SUVs. They feature a 2″ x 2″ receiver tube opening and generally have a weight carrying capacity up to 10,000 lbs. gross trailer weight. Most class 4 hitches can also utilize a weight distribution hitch for ratings as high as 12,000 lbs.

What category 3 point hitch is on a Kubota BX?

The BX-Series feature a sturdy, hydraulically controlled Category I 3-point hitch that allows you to attach a wide variety of rear implements.

Do all tractors have a 3 point hitch?

Not all tractor drawn farm implements require the use of a three-point hitch, but many of them do. … A diagram is included which shows all of the parts of a three-point hitch. It shows a drawbar fastened between the two arms, which is not commonly used, but can be.

What is a quick hitch for a tractor?

This tractor hitch lets you quickly and easily attach and release three-point implements without leaving your tractor seat. Designed for tractors up to 45 HP, this trailer hitch features four position draw pin adjustments.

Why won't my 3 point hitch won't lift?

When a tractor 3 point hitch doesn’t operate properly, many times low fluid, a clogged hydraulic filter, or low or contaminated hydraulic fluid is the cause of the problem. … If the loader does not operate correctly, then there is a problem is likey related to the hydraulic pump.

Does a 3 point hitch float?

A 3 point hitch is always in a “float” mode it does not have any down pressure. Depending on your tractor it may have position control, were the downward travel is controlled by the 3 point lever, the futher it is moved the lower the lift arms will drop.

What is SCV in tractor?

Implements are the typical use of hydraulics off the tractor, and selective control valves (SCVs) control the volume of flow. Implements use hydraulic oil to perform a variety of functions such as raising and lowering parts as well as providing power to motors and other devices for mechanical movement.

What is iMatch quick hitch?

The iMatch Quick-Hitch provides easy hookup and a guaranteed fit for all Category 1 implements designed to meet the ASAE Category 1 Standard S278. 6 for quick-attach hitches. Made in USA. All implements require a set of bushings in order for the attachment to fit and work properly with the iMatch Quick-Hitch.

Are Titan Implements quick hitch compatible?

With the Category 1 and 2, 3 Point Quick Hitch by Titan Attachments®, you can easily switch between implements that connect to your tractor’s 3 Point hitch. … CATEGORY 1 OR 2, 3-POINT HOOKUP: This adapter is designed to convert your Category 1 or 2, 3 Point hitch into a quick hitch.

How much can a Category 2 3 point hitch lift?

64036603Hitch lift capacity— 24-in. behind lift point (ASAE Standard)4828 lb.4828 lb.

What does rear lift at ends mean?

“At the ends” refers to the balls at the ends of your lift arms where your implement’s pins connect to the lift arms. You can lift 1433 lbs at that point. But most implements don’t have their weight where the pins are.

How much weight can a 1025r 3 point hitch lift?

TypeLimited Category 1Lift capacity, 24-in. behind link arms344 kg 758 lb

How do I choose a hydraulic top link?

When choosing a hydraulic top link cylinder, first determine the category of top link you require. That simply means determining your tractor’s horsepower (see list below); or, if you’ve already been using a mechanical top link, simply choose the same category for your hydraulic top link.

How long is a cat 1 top link?

Category 1 Top Link Assembly 13-1/4″ Long The rod is zinc plated to ensure durability when being used for agricultural or maintenance use. Designed for high performance, this category 1 top link measures 24″long extended, and it is 17-1/2″ closed center to center, and has 1-1/8″ threads with a 3/4″ pin hole.