Is it hard to install a clawfoot tub

The main reason installing a clawfoot tub is difficult is because of the tub’s weight. … The floor may have to be reinforced before installation of the tub begins because of the tub’s weight (an empty cast iron tub weighs 200 – 400 pounds).

How much does it cost to install a clawfoot tub?

Clawfoot Tub PricesNational average cost$2,850Average range$2,300-$4,100Minimum cost$900Maximum cost$5,800

Are clawfoot tubs worth it?

It’s also worth noting that these tubs are often cast-iron and very heavy; you might have to pay to have your floors reinforced before installation. The upshot? Clawfoot tubs can be a huge pain. If you absolutely love the look and are ready to commit to the upkeep, it might be totally worth it for your home.

Does a clawfoot tub add value to a home?

According to the RealEstate.com survey, starter homes with claw-foot tubs sold for nearly 30% more than expected. Coffered ceilings also helped homes sell for 30% more than expected, and farmhouse sinks (thanks Joanna Gaines) helped homes sell for 26% more than expected.

Why are clawfoot tubs bad?

Hard to clean in a small space Clawfoot tubs are commonly next to a wall, leaving a small gap. The trouble with this arrangement is that the tub becomes more difficult to clean. If the tub is in a really tight space, climbing into the tub is the only way to clean parts one’s unable to reach standing outside of the tub.

How far should a clawfoot tub be from the wall?

The Magic Number: 6 Inches As a rule of thumb, the minimum end-to-end (length) additional space you’ll need for a clawfoot, pedestal, or freestanding tub is 6 inches. Any less and the tub will look cramped in the space.

How heavy is a cast iron clawfoot tub?

How heavy is a clawfoot tub? All bathtubs are heavy, but clawfoot tubs tend to be especially heavy – particularly the cast-iron models. A cast-iron tub can easily weight 200-400 pounds while empty – fill it with water and climb in and you’re looking at several hundred pounds of weight.

Where do clawfoot tubs drain?

Source and drain lines come through the floor. In a typical clawfoot tub installation, both the water source pipes and the drain pipe enter the bathroom through the floor.

Can I put a clawfoot tub on tile?

You are fine installing a claw-foot iron tub on porcelain tile as long as you place the tub carefully. If you drag the tub across the tile you run the risk of scratching the porcelain if it’s a lower quality.

Why are people removing bathtubs?

The study also found that 27 percent of homeowners decided to remove the master bathtub, almost always to make room for a bigger shower with walk-in capability and fixtures like a rain-shower head.

Article first time published on

How much does it cost to refinish a clawfoot tub?

The average cost to refinish a clawfoot tub is $300 to $650, depending on the size and condition. Clawfoot tub issues such as erosion, rust, pinholes, scarring, lead paint, or chips need to be addressed before reglazing. Refinishing takes 4 to 5 hours and typically comes with a 3 to 10-year warranty.

How much value does a bathtub add?

Does adding a bathtub to your home increase your resale value? The short answer is yes, with many US homeowners recouping around 60% of their investment from having a bathtub installed in their home.

Is a clawfoot tub practical?

Clawfoot tubs work equally well installed just about anywhere in your bathroom, parallel or perpendicular to the wall or in the middle of the floor. Depending on the size of your bathroom, a clawfoot tub can serve as a very literal centerpiece, or accommodate odd spaces to make a small bathroom look more natural.

What can I put under my clawfoot tub feet?

A small circle of leather or felt placed beneath each claw foot will prevent it from scratching. Or you can glue these materials to the bottom of large claw feet and cut their shape to fit the foot, making a protector that’s less visible from the sides.

Can my floor support a cast iron tub?

In general, unless there is something wrong with the joist spacing or the wood has rotted, the framing in most houses should be able to support a standard size cast iron tub with no problem.

Why is it called a clawfoot tub?

The clawfoot tub, which reached the apex of its popularity in the late 19th century, had its origins in the mid 18th century, when the ball and claw design originated in the Netherlands, possibly artistically inspired by the Chinese motif of a dragon holding a precious stone.

How do I choose a clawfoot tub?

Traditionally, clawfoot tubs are white, but nowadays they come in a variety of colors. Choose a hue that complements your bathroom’s palette or make a real statement with a bold, vibrant shade. Another important decision is to decide on the type of feet you prefer for your clawfoot type.

How many gallons does a cast iron tub hold?

Alcove cast iron bathtubs are usually 60 inches long, hold 32 gallons of water, and weigh 320 pounds on average. Freestanding cast iron bathtubs are 60 to 75 inches long, hold up to 82 gallons of water, and weigh an average of 385 pounds; however, large ones can weigh up to 500 pounds.

How much are clawfoot tubs worth?

Interestingly, most antique clawfoot tubs that you can find for sale have already been refurbished, and so they’re a little more expensive than an untouched tub is going to be. For example, a restored 5′ clawfoot tub was sold for $1,000, and a refinished 6′ clawfoot tub from 1926 sold for about $2,500.

Are clawfoot tub feet universal?

Here is a set of Clawfoot tub replacement feet that will work on most tubs manufactured within the last 100 years. These Lions paw styled, universal replacement clawfoot tub feet will be sure to add a stunning element of class to your bathroom.

Can you shower in a clawfoot tub?

But, if you are adding a clawfoot tub or replacing the rod then be sure to do your research. … Showering with the liner inside the tub should keep from getting excess water on the floor surrounding it. Another thing that will help is getting one large liner and curtain instead of multiples put together.

How do I stop my freestanding tub from moving?

Carefully set the tub in position and adjust the tub feet as necessary until level. Once level, apply a generous bead of silicone on the bottom of the feet. This will prevent the tub from shifting after installation.

Can a freestanding tub be against a wall?

Corner or wall-adjacent. Some freestanding bathtubs are designed to fit into a corner of the room or against a wall.

What is claw foot?

Claw foot is a deformity of the foot. The joint of the toe that is closest to the ankle is bent upward, and the other joints are bent downward. The toe looks like a claw.

Can you put a clawfoot tub in a small bathroom?

They also come in a variety of sizes, so even you have a small bathroom, there is likely a clawfoot tub that will work for your space. … Small bathroom? No problem! A clawfoot tub actually takes up less space than a traditional installed tub, allowing you to add a relaxing soaker to rooms where you didn’t think possible.

Are bathtubs becoming obsolete?

Increasingly, homeowners are getting rid of their tubs for lavish, high-end showers. Small spaces and homes owned by millennials and kid-free adults are particularly more apt to agree with the bathtub becoming obsolete. They simply ditch the tub.

Does not having a tub in master bath hurt resale 2020?

The short answer, when considering resale, is yes. Ideally you should have at least one bathtub in your home if you plan to sell in the near future, but this does not have to be in your master bathroom. … If your master bath is spacious enough, consider a freestanding tub and large shower as an additional amenity.

Are bathtubs outdated?

In fact, the Houzz 2020 Bathroom Trends Update suggests that bathtubs are leaving master bathrooms more than ever before. Houzz researchers found that half of renovated master bathrooms no longer have a bathtub.

Is it a good idea to Reglaze a tub?

If your existing bathtub is already in pretty good shape but is covered in minor stains, scratches or other surface imperfections, reglazing is a good option. It’s also ideal for certain types bathtubs. … Acrylic bathtubs can also be reglazed, as long as they don’t have any significant issues.

Can a cast iron tub be reglazed?

For an average cost of $350 to $500—a fraction of the $1,200 to $5,000 expense of a new cast-iron or steel tub installed—refinishers can make an antique fixture look brand new. “Professional refinishing can be a cost-efficient solution for that retro look,” Trethewey says.