How much horsepower does a 74 vortec have

The 7400 Vortec V-8 GM engine has 454-cubic inches and was rated at 290 horsepower at 4,000 rpm. It had 410 torque at 3,200 rpm. The engine has a bore and stroke of 4.24 inches x 3.99 inches.

How much horsepower does a Vortec have?

Engine:General Motors 6.0L Vortec V-8 (Vortec 6000)Emissions Equipment:Catalytic converter, positive crankcase ventilation (PCV)Max Engine Speed:6,000 RPMPeak Horsepower:360 HP @ 5,400 RPMPeak Torque:380 HP @ 4,200 RPM

How much horsepower does a 5.7 V8 Vortec have?

The 5.7 short block engine is the perfect engine for excellent performance with a 260 horsepower rating. The intake valve, exhaust valve, and other components are made with cast iron.

What is a 454 Vortec?

The Vortec 454 engine had 7,439 cubic centimeters, or 454 cubic inches, of displacement, giving it the 454 or 7400 name. It was an eight-cylinder engine with a multi-port fuel injector, and each cylinder had two valves that were operated by hydraulic roller cams. … of torque, and had a cast iron block and cylinder heads.

How much horsepower does a 1974 454 have?

Corvette 454 LS4 Big Block While Corvettes were available with small block V-8s in 1974, including a 195 horsepower model, the engine most often associated with the Corvette brand was the 454, also known as the LS4.

How much HP does a 350 Vortec have?

The ’96-’00 350ci Vortec 5700 engines enjoy lots of aftermarket support to help improve the 255 hp and 330 lb-ft of torque they’re rated for at the crank. An engine swap can be quite costly, so putting even a quarter of those funds into your Vortec 350 engine could get you where you want to be.

What is the horsepower of a 5.7 liter Chevy engine?

What are the specs of a Chevy 350 engine? It’s a 5.7L (350 cubic inch) small-block, V8 engine with a 4.00-inch bore and a 3.48-inch stroke. Depending on the year, make, and model of the car that it is equipped in, this engine is capable of outputting between 145 to 370 horsepower.

How much horsepower does a 2000 7.4 Vortec have?

The upgraded Vortec 7400 is a 7.4L V8 OHV 16V-volt FI engine. This engine has two valves per cylinder and features multi-port fuel injection. It was also noted to have more power for gasoline engines. The Vortec 7400 produces 290 horsepower at 4,000 revolutions per minute and 410 foot pounds of torque at 3,200 rpm.

What car came with a 572?

POPULAR SEARCHESLSCamaroCorvetteCrate Engines

How much horsepower does a 1978 454 have?

The 454 engine produced about 230 horsepower and 360 foot-lbs. of torque.

Article first time published on

How much horsepower does a 5.3 have?

5.3L EcoTec3 V8 Expect up to 17 city and 24 highway MPG, as well as 355 HP and 383 lb. -ft. of torque.

How much horsepower does a 1998 Chevy Silverado 5.7 Vortec have?

The Silverado also has a 5.0 liter V-8 which is capable of 230 horsepower. This engine is standard on the extended cab sportside models. There is also an optional 5.7 liter engine capable of 255 horsepower and a diesel 6.5 liter V-8 capable of 180 horsepower. Both engines are backed by a five-speed manual transmission.

Is 5.3 or 5.7 Vortec better?

IMO-The 5.3 is definately a faster motor but the 5.7 seems to handle weight better. My 5.3 averages about 17mpg while and I got about 15mpg with my 5.7. It is hard to get a good comparison though. The 5.7 was a Z71 regular cab, short bed with an auto and 3.73s.

How much horsepower does a 73 454 have?

Chevy began installing 454 V-8s in its trucks in 1973. All 454s have a 4.25-inch bore and 4-inch stroke. The 1973 1-ton trucks were equipped with a 240-horsepower 454 generating 355 foot-pounds of torque.

How much horsepower does a 1973 454 have?

Finally, in 1973, GM introduced the 454ci LS4 as an available engine option for the Corvette. Rated at 270 HP, the LS4 was a far cry from the L88 of less than a decade prior, yet impressive nonetheless, when compared to other manufacturer’s offerings of the era.

What generation is a 1974 454 big block?

Generation VII It is an all-iron engine (block and heads) with two valves per cylinder. It retained the same bore diameter as the old 7.4 L (454 cu in) big-blocks, but the stroke was upped by 9.4 mm (0.37 in) to reach 495.95 cu in (8.1 L), for a total bore and stroke of 41⁄4 in × 4.37 in (107.95 mm × 111.00 mm).

How much HP does a 6.0 Vortec have?

Engine:General Motors 6.0L Vortec V-8 (Vortec 6000)Fuel:Regular unleaded gasoline, E85 Flex Fuel compatiblePeak Horsepower:360 hp @ 5,400 rpmPeak Torque:380 hp @ 4,200 rpmGoverned Speed:6,000 rpm

How much horsepower does a 1999 5.7 Vortec have?

The Vortec generated 255 horsepower at 4,600 rpm and 330 foot-pounds of torque at 2,800 rpm, or the force required to move a vehicle forward.

How much horsepower does a 1972 Chevy 350 have?

The 1972 Chevy 350 has about 270 horsepower stock. V-8 engine (220-240 gross HP in ’67-8) was dropped in 1969 in favor of the 350 CID variant rated at 255 gross HP (200 net H.P. $2000 OBO Posted on other sites.

How much horsepower does a 1970 Chevy 350 have?

What started out as a high-compression, solid-lifter 350 rated at 370 hp in 1970 was reduced to a low-compression, hydraulic-lifter 350 rated as low as 205 hp (the “performance” L82) by 1975.

What's the difference between a Vortec 350 and a regular 350?

The regular 350 head uses a 90 degree bolt angle while the Vortec uses a 72 degree bolt angle. When the head is bolted to the engine, all the attachment bolts point straight up, as experienced mechanics know.

How can I make my 350 Vortec faster?

Modify your air intake. …
Modify your exhaust. …
Change your camshafts and valve train. …
Purchase new cylinder heads, or have yours ported and polished. …
Have your motor rebuilt and blueprinted.

How much does a 632 big block cost?

The 632-cubic-inch street engine won’t be available until early next year, but one dealer has already listed an MSRP of $37,758.72.

How much HP did the 409 have?

The top-trim versions of the street-car 409 churned out an astonishing 425 horsepower, while the Bill “Grumpy” Jenkins-tuned NHRA cars could run the quarter mile in under 13 seconds.

How much horsepower does a 472 Cadillac have?

When Cadillac debuted its new creation in the 1968 models, the V-8 was produced with a 4.30-inch bore and 4.06-inch stroke to yield 472 cubic inches (7.7 liters), the largest passenger car engine in the industry. With 10.5:1 compression, it produced 375hp and 525-lbs ft of torque when it was introduced.

How much horsepower does a 1999 Chevy 454 have?

The 7400 Vortec V-8 GM engine has 454-cubic inches and was rated at 290 horsepower at 4,000 rpm. It had 410 torque at 3,200 rpm. The engine has a bore and stroke of 4.24 inches x 3.99 inches.

How much HP can a 396 make?

The average power numbers from 4,000 to 6,250 rpm (where it carried over 400 lb-ft of torque) were 438 hp and 450 lb-ft of torque. While power peaked at a high 6,400 rpm, low-end torque was still plenty respectable with the motor peaking 483 lb-ft at 4,700 rpm.

How much horsepower does a 427 have?

Late 1960s. By 1967, Chevrolet offered horsepower ratings of 385 and 400 on two 427s, with the torque rating for both at 460 pound-feet. The 425-horsepower 427 remained untouched. However, Chevrolet introduced its L71 427 with three two-barrel carburetors to generate 435 horsepower and 460 pound-feet of torque.

How much HP does a 350 big block have?

a typical 350 Chevy can make upwards of 350 – 375 HP before you exceed the reliability of the components. For a big block with the same stock components it can make in the area of about 400 to 475 or so HP and handle upwards of about 500 HP before you exceed the reliability of the stock cast pistons.

How much horsepower does a 350 4 bolt main have?

Stock 350. The four-bolt main 350 with two-barrel carburetor came with 8.5:1 compression, and was good for 145 horsepower at 3,800 rpm and 250 foot-pounds of torque at 2,200 rpm. 350s equipped with four-barrel Quadrajet carburetors produced 170 horsepower at 3,800 rpm and 255 foot-pounds of torque at 2,800 rpm.