The average rate for a general contractor is about $50 per hour. Considering the job could take up to 25 hours to complete, budget at least $1,250 for labor in addition to materials. A standard bathtub/shower combination averages $300 to $2,000 for materials.
What is the labor cost to replace a bathtub?
The average rate for a general contractor is about $50 per hour. Considering the job could take up to 25 hours to complete, budget at least $1,250 for labor in addition to materials. A standard bathtub/shower combination averages $300 to $2,000 for materials.
Do you install the tub or tile first?
In your installation process, you should put the backer board down and tile the floor and the backsplash around the tub first, but leave off the row of tiles that directly surround the tub. Next, you’ll install the tub, make it level, and connect all of the plumbing.
How much does it cost to retile around a bathtub?
Average Cost$12.50 per square footHigh Cost$2 per square footLow Cost$17 per square footHow much does it cost to replace a shower tub combo?
Shower/tub combos cost around $300 to $700 for a fiberglass surround, and they usually take a few hours to install with the plumbing. Installing a shower/tub combo is usually a little more involved than a stall, so plan to pay $600 to $800 for the installation of the unit and fixtures.
When should I replace my bathtub?
- Leaks. This is the biggest and most urgent sign that your current tub needs to go. …
- Cracks. A cracking tub can be the culprit of many issues. …
- Stains. Another unattractive characteristic is stains on your bathtub. …
- Mold & Mildew. …
- Difficulty Using It.
How long does it take to install a new bathtub?
Depending on your skill and knowledge level, anywhere from 3-4 hours to half a day, depending on the setup and layout of your bathroom.
Does flooring go under bathtub?
Bathroom floors are notorious for suffering water damage and the area under the bathtub is no exception. Flooring repairs can be intimidating, but the subfloor under the tub generally consists of plywood secured over floor joists and is fairly simple to replace — once you get access to it.What do you put under a tub?
Both regular thinset mortar and floor leveling compound are suitable. A series of strategically placed piles is easier to control than a full bed, and it provides comparable support for the tub. Level the subfloor in the alcove where you intend to install the bathtub, and cut the hole for the drain.
Is it OK to tile before drywall?Sheetrock should be up, second coat taped, sanded, and preferrably atleast primed, if not painted, prior to installing the floor tile. … All that should be left when the tile floor goes in is to install the wood base. Even the door trim should be in already (just undercut it for the tile).
Article first time published onHow much does it cost to tile a tub shower?
The national average cost to tile a shower is between $547 – $1,901 depending its size. Typically, tiling a shower costs about $25 per square foot. For a standard tub that needs six to eight feet of tile, you would spend $2,000.
What is the average cost to renovate a small bathroom?
The national average to remodel a small bathroom is typically $6,500, but it can range anywhere from $1,500 up to $15,000 or more. For a complete remodel, you will likely pay $70 per square foot for low-end fixtures with DIY labor, and up to $250 per square foot for high-end fixtures installed by a licensed contractor.
How much does it cost to install a tile shower?
According to estimates from The Home Depot, the average cost to tile a shower is $1,500 based on this breakdown: Tile cost: $2 per square foot. Setting materials: $1.37 per square foot. Installation: $8 per square foot.
Which is cheaper to install tub or shower?
Installing a shower is cheaper than a bathtub as it uses less water than a bath. The use of a showerhead to deliver water and the ability to open and close the shower when necessary reduces the amount of water used. Showering instead of taking a bath can save water provided it is used responsibly.
How long does it take a plumber to fit a bath?
While on average it takes around 5 days for a bathroom to be installed, this is going to differ depending on the overall size. Bathroom fitters will certainly work fast, but sometimes you can save a LOT of money by choosing to DIY.
How do I turn my bathroom into a bathtub?
- Choose Your Tub. Before you begin, measure your current bathtub alcove around the shower walls. …
- Turn Off the Water. …
- Disconnect the Drain Flange and Overflow Cover. …
- Disconnect the Drain Assembly. …
- Separate the Tub from the Wall. …
- Remove the Tub. …
- Dispose of the Old Tub. …
- Set the New Tub Into Place.
Is it difficult to replace a bathtub?
Replacing an old bathtub with a new bathtub is a very difficult project. … If you have to open a wall to remove the old tub and position the new tub, the task is much harder. You will need a helper to move out the old tub and set in the new one. You may want a professional plumber to make tub connections.
How long do bath tubs last?
On average, bathtubs last 10-30 years, depending on the bathtub material. Modern, inexpensive tubs made from acrylic and fiberglass will last 10-15 years. A porcelain-enameled cast-iron tub can last much longer but you will need to refinish it every 5-15 years.
What is the life of a bathtub?
You can expect a bathtub to last from 10 to over 50 years, depending the material used, with an average of 25 years. Fiberglass reinforced plastic (FRP) is estimated at 10± years, enameled steel at 15± years, acrylic 30± years, and cast iron 50± years.
Do all bathtubs need a mortar bed?
Whether you are installing a regular acrylic bathtub that doubles as a shower unit or a larger two-person Jacuzzi, most bathtubs require a mortar base for the tub to rest on. … Without this support, the plastic of the tub would eventually break and crack.
Can a drop in tub have a shower?
Can a drop in tub have a shower? … Most drop in tubs can be fitted with a shower as long as they’re against a wall and have an adequate enclosure; doors that sit atop the rim are recommended to keep water from collecting on the deck.
Should you install flooring before bathtub?
Protect against floor scratches, cracks, stains and damage If the flooring is placed before the bathtub, it can lead to scratching or damaging the floor with trying to position a heavy object like a bathtub, so you can simply place it first and add the flooring and walling to make it more convenient.
Do you tile over tub lip?
The best approach when installing cement board or other tile backer around a tub is to keep the cement board out of the lip area. Apply it to the wall with the bottom edge about 1/4 in. above the lip of the tub. Then apply a generous amount of thin-set to the bottom bathtub tile and position it 1/8 in.
Is drywall supposed to touch the floor?
Drywall should absolutely NOT touch the floor. Aim for a 3/8″ gap between the top of your floor and bottom of the drywall. The issue is that water wicks. Should moisture get into the drywall, it will encourage mold to grow.
Do you do floor or walls first?
To save on all the cleaning, it would be best to do the floors first. If you do the walls first, you’ll end up hiring someone to clean all the floors once the wall paint is done. If your company is trying to save money, this might not be the most cost-effective strategy.
Do you drywall before installing bathtub?
Fiberglass and acrylic tub and shower enclosures come with a flanged edge that attaches directly to the wall studs, and the proper way to hide this flange is to install drywall over it. Consequently, enclosures are typically installed on the bare studs.
What is the most expensive part of a bathroom remodel?
According to HomeAdvisor (NASDAQ: ANGI), labor accounts for 40% to 65% of the average bathroom remodel costs, which clearly makes it the single most expensive part of a bathroom renovation. Most property owners choose to hire a general contractor to: Manage and oversee the remodeling project.
What is the average labor cost to install tile?
The labor cost for installing tiles is about $4 to $32 per square foot. Labor costs range from $4 to $14 per square foot for floor tiling, while those for a backsplash or countertop are about $25 to $32 per square foot.
What is the average cost to replace a shower?
Shower replacement costs $2,000 to $9,000 on average, depending on the shower size, materials, and plumbing work required. Replacing a shower insert costs $1,000 to $8,000, including labor and materials. Removing an old shower costs $70 to $800, depending on if it’s tile or a prefab stall.
How do you estimate a tile job?
To price the tile, calculate the area of the job by multiplying the length of the room by the width for the total square feet. Multiple the total square feet by the tile price per square foot, and then add 20 percent for cuts and breakage.
Does a walk in tub add value to a house?
In general, removing a tub and installing a well-appointed walk-in shower also increases the value of a home. Removing your only tub to install a walk-in shower can make your home’s value take a hit because most prospective homebuyers, especially families with small kids, want at least one bathtub.
