The standard size for a new scaffold board is a thickness of 38mm, a width of 225mm, and lengths going up to 3.9m (13ft). As timber goes, scaffold boards are fairly “chunky”, which is what gives them a wonderfully rustic and industrial aesthetic and feel.
How long do scaffold boards last?
Most timber cut(kilned) wood in raised bed walls tends to last anywhere between 3-15 years, depending on weather, the wood itself(pine/spruce) and water, etc, and if you line the beds with a liner.
How much does a 12ft scaffold plank weigh?
Weight: 48.0 lbs.
What type of wood is used for scaffold boards?
Wood, such as fir or pine, is the most common material. High-quality wooden planks, such as Kennison Forest Products solid sawn scaffold planks or sure-lam LVL (laminated veneer lumber) scaffold planks, provide durable, safe planking solutions.Are scaffold boards treated?
Whilst scaffold boards are indeed used externally for scaffolding, they’re not always actually treated for external use. In fact, they’re usually made from a very inexpensive whitewood which won’t last the test of time outdoors.
Do scaffold boards rot?
Fungal decay, usually wet rot, is common in poorly stored scaffold boards. Wood is vulnerable to attack when the moisture content is over 20%. It can be detected by discolouration of the wood, which also becomes softer.
Why do scaffold boards have end bands?
The end bands must be present at both ends of the scaffold board to protect the vulnerable end grain of the boards. They should extend around the edges of the board by at least 150mm for 38mm boards and at least 100mm for 63mm boards. Fungal decay, usually wet rot, is common in poorly stored scaffold boards.
Are scaffold boards waterproof?
Rough scaffolding wood treated with Woodcon for a water-repellent surface. Woodcon settles around the fibers of the wood and makes the scaffolding wood of your planter completely waterproof, all thanks to an transparent coating in-and-on the wood surface.Do scaffold boards shrink?
The boards will slowly shrink in size when they dry out. If possible, use a moisture meter to measure the moisture content of a board before purchase. The ideal moisture level will be between 4 and 12%. Anything higher than this and you’ll need to dry the boards before working with them.
Are scaffold boards soft or hardwood?Although it is softwood, scaffolding wood comes in thick planks that make sturdy furniture. If it is not treated with glues, finishes and paints, scaffolding wood can be recycled into engineered wood products or fuel.
Article first time published onDo scaffold boards warp?
They are always warped and twisted… no board is ever the same and they are never the same thickness or depth throughout their length… this is their characteristic because they were never sawn in the timber mills to be made into furniture… … Remnants of paint the scaffolding company use to identify their boards…
Are scaffold boards Pine?
This wood is selected over wood grown in the UK such as Sitka Spruce and Scotts pine as it is the correct size and has superior structural integrity, which is inherent in the trees genetic make-up.
What is Z plank?
z-Plank® is a strong yet lightweight Laminated Veneer Lumber scaffold plank. The structural uniformity of LVL combined with the strict quality control of all processes of manufacturing ensures z-Plank is safe and reliable scaffold plank.
What are scaffold boards made of?
The reclaimed scaffolding boards we use are made of European Whitewood (sometimes referred to as silver fir or Norway spruce). European Whitewood is is a medium density soft wood which is low in weight. It is sturdy and long lasting and therefore suitable for load baring uses, hence the use as scaffolding boards.
How heavy is a 13ft scaffold board?
InfoDetailLength3.9MWidth225mmThickness36mmWeight18KG
Are scaffold boards strong?
Scaffold board is strong, structural timber, ready for use for building scaffolding and structural work or creating a raised flower bed.
How long will untreated scaffold boards last?
Scaffolding boards make good robust material for making your raised garden bed and should last 4 to 5 years, depending on your local conditions, before they need to be replaced.
Are scaffold boards OK for raised beds?
Raised beds are ideal for fruit and vegetable growing because maintenance is easier, as you don’t need to dig, and the soil doesn’t get walked on and compacted. A robust raised bed can be constructed from interlocking scaffolding boards, which look attractive and are inexpensive.
Can you cut scaffold boards?
Cut the scaffold boards to the length you’ve chosen. If you don’t want to use the metal ends, you can cut off the end of the planks beyond the metal trim (don’t try to saw through the metal) before measuring and cutting the length.
Should scaffold boards be clipped?
scaffolders will sometimes tie down spare boards or incomplete scaffolds with a tube across at the end of a shift but this is never done on a complete scaffold , in my 10 years scaffolding experience all over the country on petro chem and nuke sites and offshore work , boards must be tied with clips or in some cases …
What weight can a scaffold board take?
The maximum safe working load of a scaffold board is 150 KG evenly spaced. The total weight of the user and tools must not exceed this. When moving to a new site, carry the equipment with care.
How do you finish a scaffold board?
It’s also easy to apply – simply brush it on and remove excess with a rag. In particular with scaffold boards, which can be rougher or more textured than other timber items, danish oil applied with a brush is much better at getting in to and penetrating this type of surface, whereas wax and varnish may not be.
What are Grade A scaffold boards?
A grade that is suitable for support at centres up to 1.2m. It may be selected by visual or, preferably, machine strength grading. Each board is passed through a machine that measures deflection under a prescribed load. The board is tested in the plane that it will be used.
How do you keep scaffold boards from warping?
The “correct” procedure is to let them acclimatise/dry. warp, and then plane them straight before using them for any kind of joinery. Depending on the thickness and length, it might be possible to use some kind of mechanical means to stop the warping… but then you run the risk os the wood splitting as it drys.
Are scaffold boards cheaper than decking?
Scaffolding boards are inexpensive softwood which can be easily bought anywhere. They are generally twice as wide than a traditional decking boards which to me is much more striking.
Are scaffold boards good for fencing?
Scaffold boards are a heavy duty of way of erecting a fence. If you install these, you should expect the fence to last a very very very long time! Long lasting and durable, they will not need much maintenance. You can paint or apply a good quality wood preserver if desired, but the best effect is when left to nature.
Are new scaffold boards treated?
These are new scaffold boards which are freshly sawn by a machine, they are brown pressure treated to ensure their longevity.
What are scaffold boards used for?
They are a popular choice for cladding, flooring, decking and furniture making. They have been used to make benches and bridges, planters and pergolas, beds in the bedroom and beds for your vegetables. Reclaimed scaffold boards are a great material to work with as they are always a reliable width and thickness.
Are oak sleepers better?
Hardwood sleepers are much more resistant to softwood sleepers, this is because oak is generally high resistant to any decay and without being treated it can last you up to 30 – 40 years.
How thick is a scaffold board?
It should be 225mm wide and 38mm thick. This goes under the baseplate, it can be from 450mm long to 4m long. It should be 225mm wide and 38mm thick.
How do you make raised beds from scaffold boards?
- Mark your boundaries. Using a half-moon, create the shape of your bed in the ground. …
- Lay the boards. Lay the four large scaffold boards out to see what the bed is going to look like. …
- Nail your blocks to the board. …
- Stake your boards. …
- Add compost and manure.
