The Edgeguard Mini can hold up to 5,000 square feet of lawn products, like fertilizer and seed. With dial settings from 2 to 15, this broadcast spreader can handle a wide range of different sized products. When applying grass seed for a new lawn, or repairing bare spots, set the orange dial to 13.
What setting should I set the Edgeguard Mini for fertilizer?
The Edgeguard Mini can hold up to 5,000 square feet of lawn products, like fertilizer and seed. With dial settings from 2 to 15, this broadcast spreader can handle a wide range of different sized products. When applying grass seed for a new lawn, or repairing bare spots, set the orange dial to 13.
What setting do I put my Scotts spreader on?
Some typical settings for seeding Scotts Classic Heat and Drought grass seed in a Scotts rotary type or broadcast type spreader are 11.5 for reseeding and 14 for a new lawn or to repair bare spots. For a drop style spreader the setting for reseeding is 9.5 and 14.5 for a new lawn or repair of bare spots.
How do you determine spreader settings?
- Divide 100 by the square foot the bag of fertilizer covers.
- Multiply the weight of the bag by this number.
- The answer is the amount of fertilizer needed to cover 100 sq. ft.
- Place this amount in the spreader.
- Mark off a 10 ft. x 10 ft. area.
- Apply using the suggested setting.
What do numbers mean on Scotts mini spreader?
Those numbers aren’t how many pounds per 1,000. They’re just a setting number. Some fertilizers will have the calibration number on the bag but more often than not you’ll have to calibrate it yourself by marking off an area and applying the fertilizer and then picking it up and weighing it to see how much you put down.
What do the spreader settings mean?
A spreader setting is the rate in which you apply product to your lawn. Each Jonathan Green product has recommended rates of application and coverage based on bag size. … In general, the smaller you set your spreader setting the smaller the hole and the slower the material releases from the hopper.
How does Scotts EdgeGuard work?
EdgeGuard blocks off the right side of the spreader pattern to prevent product from spreading onto non-lawns areas.
Is Scotts Edgeguard a rotary or drop spreader?
Drop Spreader Up to 4,000 sq. ft. Up to 5,000 sq. ft.What setting should I use on Scotts spreader for lime?
SpreaderSettingPrize Lawn (Broadcast)5Prize Lawn (Drop)11.5Central Quality (Broadcast) 600B, 700, 100A7Central Quality (Drop) 175, 185, 20512
Can too much lime burn your grass?Can Lime Burn Grass? When extra lime remains on grass blades, it can cause chemicals to further damage lawns that are already wilted and weak. Watering your lawn after a lime application defends against potential burns as any excess product will be removed from the lawn’s surface.
Article first time published onHow do I know how much lime to use?
Generally, using quantities of finely ground limestone given per 1,000 square feet of lawn area, if your current pH is 5.5, apply 30 pounds for sandy soil, 80 pounds for loam and 100 pounds for clay soil.
How much lime should I use on my lawn?
Never add more than 50 pounds of lime per 1,000 square feet in a single application. After you’ve applied the lime, immediately water your lawn to rinse any extra lime off the grass blades to prevent leaf burn.
Is a drop or rotary spreader better?
Opt for a rotary spreader if you regularly work over a large swath of lawn or soil area as it helps cover a greater distance in less time than a drop spreader. … Select a drop spreader if depositing a perfectly uniform amount of granules is critical for your most common tasks.
Which type of spreader is best for applying fertilizers?
Broadcast Spreader – Hand, Push-Type, Pull, Tow Behind or Powered. In my opinion, the broadcast fertilizer spreader or rotary spreader is the best, easiest and most versatile of all the spreaders used to apply dry fertilizer in both commercial applications and for the homeowner, especially those with a large lawn.
How do you apply Turf Builder by hand?
If you have no other way to do it, you can certainly spread it by hand. Just make sure to use gloves and apply it very carefully. Walk backward, throwing fertilizer out as you go in a sweeping motion. Of course, you can use water-soluble or liquid fertilizers with a hose too.
How do you broadcast lawn fertilizer?
Place the spreader over a hard surface (like a driveway or walkway) and fill it with fertilizer. Sweep up any fertilizer that spills. Spread fertilizer over the edges of the lawn first. Move at your normal walking speed.
How do you measure fertilizer spreader?
The spreader calibration formula is “amount of fertilizer used- times 1000- divided by the area of the test strip”. If using a rotary spreader: Lets say your spreader makes a 10 ft. wide strip. Now, multiply 10 by the length of the test strip, which is 50ft.
How often should a fertilizer spreader be calibrated?
The spreader is properly calibrated when the calibration rate is within ± 5% of the recommended 5.00 lb. (in this example when the calibration rate falls between 4.75 to 5.25 lbs. of fertilizer per 1,000 sq. ft.).
