The main advantage of metal fence spikes for post support is their ease of installation, using only simple tools with no need for digging or concrete. Even high-quality treated timber posts will decay to some degree over time when sitting in concrete. … If a fence post does fail it is easily removed and replaced.
Are fence post spikes as good as concrete?
The main advantage of metal fence spikes for post support is their ease of installation, using only simple tools with no need for digging or concrete. Even high-quality treated timber posts will decay to some degree over time when sitting in concrete. … If a fence post does fail it is easily removed and replaced.
How deep should a 8 foot fence post be?
How Deep Should a Fence Post Be? For an average fence post, about 6 to 8 feet tall, prepare to dig a post hole about 2 feet deep. To install a fence post, you’ll need a shovel or post digger, a 6-foot level, soil, and gravel or crushed stone.
How do you get a fence post out of a spike?
- Cut the post off 6 inches or so above the metal.
- Drill a hole horizontally through the wood. I used a 1 inch spade bit.
- Insert a piece of rebar or some other strong metal rod through the hole and then lever the wood out.
How many bags of quikrete do I need for a fence post?
When you account for the fence post what you need is 4 bags. The best way to determine the size of each fence post hole is: The diameter of the hole is 3 times the width of the fence post. The depth of the hole is 1/3 to 1/2 the above ground height of the fence post.
How do you get metal spikes out of the ground?
- Thoroughly wet the dirt, or wait until you have had some heavy rains to soften it.
- Dig down with the trowel to expose a couple of inches of the spike.
- Bash the tip of the spike sideways with a sledge hammer or large mallet. …
- Tug the spike out of the ground.
- If it resists, bash it some more.
Should wood fence posts be set in concrete?
Concrete provides a strong foundation for wooden fence posts, but can rot them more quickly. Setting them in dirt, with or without gravel or crushed rock depending on your soil type, can help the posts last longer before going rotten. You can also use metal fence post anchors to prolong their life.
Do I need gravel under my fence post?
DO Employ a Base Gravel Layer If a fence post fails without any sign of a pest infestation, it’s likely that the failure was caused by moisture that rotted the wood over time. … Next, pour an additional three inches of gravel into the hole, tamping down a second time.How do you build a fence without a sinking post?
- A Metal Spike Anchor and a Sledgehammer. If you are not wanting to dig to set your fence post, a metal spike anchor might be the easiest option. …
- T-Post Driver. …
- E-Z Spike. …
- Steel Posts in the Ground. …
- Above the Ground Fences.
- Dig post hole so diameter of the hole is 3 times the width of the post (i.e., the hole for a 4” wood post should be about 12 inches wide). …
- Add about 6 inches of QUIKRETE All-Purpose Gravel into the bottom of the hole. …
- Set the post into the hole and attach 2×4 braces to adjacent sides of the post.
Can you install fence posts without concrete?
Completed install of a fence post without concrete. … Gravel fence posts are also much easier to remove later on than their concrete counterparts. If there’s any chance you’ll want to remove the fence at some point, then gravel is the way to go. Lastly, you’ll want to consider your soil type when putting in fence posts.
How do I get rid of Brabantia ground spikes?
Dig around it a little then drill holes in either side about 3cm down and slide a metal rod through (something like a large screwdriver) then spin it to dislodge it whilst slowly pulling it upwards. Just removed one myself this week.
How do you remove a rotten fence post set from concrete?
You can dig around the post hole, and then use several long pry bars to lever the concrete footing out of the ground. If the wood left inside the footing is not completely rotten, then you can sometimes screw a large eyebolt into the wood and then pull it out with a rope or chain.
What is a Met post?
Metpost is Britain’s leading brand of fence post supports and fencing accessories. … Metpost products can be used to erect new fencing but are also ideally suited when repairs are needed to existing fences. Metpost products come in a range of sizes and are either galvanised or in a paint finish.
Is 2 ft deep enough for fence post?
2 feet is the minimum depth that you should dig your fence post holes for. To dig the holes one-third to one-half of the post’s aboveground height, is a general formula. The deeper you dig the holes, the more stability your fence has.
How far apart do you put fence posts?
Most fence posts can be spaced 8 to 12 feet apart. While this is a general criteria, it doesn’t cover all scenarios. For instance, high tensile fence can have larger spacing, requiring line posts every 15 to 20 feet for field fence styles, and as much as 20-30 feet for high tensile barbed and smooth wire.
How many bags of cement do I need for a fence post?
Most fence post holes will need between 1 – 4 bags of concrete to securely hold the post in place. The best way to determine the size of the hole is: Diameter of the hole is 3 times the width of the fence post.
How deep should a 10 foot fence post be?
The general rule of thumb when setting a post is that the depth of the post’s hole needs to be one-third to one-half of the actual above-ground height of the post.
How many square feet does a 50 lb bag of quikrete cover?
60 cubic feet. One 50-pound bag of Quikrete Fast Setting Concrete Mix yields about . 375 cubic feet. For example, if you need to cover 33.333 cubic feet, using 60-pound bags of concrete, divide 33.333 cubic feet by .
How big of a hole do I need for a 4x4 post?
The diameter of your post hole should be three times the diameter of your post. So, if you’re planning on using a four-inch round or 4×4-inch square post, your post hole will need to be 12 inches in diameter. For a six-foot-high fence post, we would need a hole that’s 36 inches deep and 12 inches in diameter.
How do you put fence posts in concrete and gravel?
- Wear gloves to protect hands when working. …
- Place 3 to 5 inches of pea gravel in the bottom of the hole. …
- Add 6 inches of pea gravel around the post and pack it with a tamp.
Is 1 foot deep enough for fence post?
Determining Post Length You should always bury one-third of your fence post underground. … This means that unless you are building a 2-foot fence, which is unlikely in any garden, a 1-foot hole will not be deep enough to support your post. For main and gateposts, you should dig the holes an additional 6 inches deep.
Should a fence post wiggle?
WOBBLY wooden fence posts should be repaired promptly before they cause other fence parts to loosen. Posts that have been in the ground for less than five years usually wobble because of improper installation; ordinarily, tightening them is fairly easy.
How do you remove a metal fence post from concrete?
If your metal posts have been set in buried concrete, it’s best to pull the concrete out with the each post, and with mechanical help, you can avoid excessive digging. Drill a 1/2-inch hole through each post — about 4 inches above the ground — and insert a length of 3/8-inch re-bar to provide a grip.
