Turn the knob from the “Off” to the “Pilot” position. Push in the pilot knob, which manually sends gas into the system. Push the igniter button once every second until it lights. Depending on how long it’s been since the gas fireplace was last used, ignition may take multiple attempts.
Should gas fireplace be open or closed?
The doors should always be fully open or fully closed. … The glass doors should be closed as the fire dies down to minimize the amount of room air going up the fireplace chimney. When burning gas logs in a wood-burning fireplace, the glass doors should always be fully open when the gas logs are burning.
Where is the damper on a gas fireplace?
Traditional wood or gas fireplaces have one of two types of dampers. Throat dampers are installed at the base of the chimney, over the firebox — the main chamber where the fire burns. They’re usually opened by a handle, a crank or a chain located inside the fireplace.
Should I turn off the pilot light on my gas fireplace in the summer?
Your Utility Bill Perhaps the most important reason to turn off gas fireplace pilot light in summer is because of the money and energy you will be saving. If you leave the pilot light on during the summer it is simply sitting there burning gas, which is wasting gas and contributing to an exorbitant energy bill.How many hours can you run a gas fireplace?
In short, you really shouldn’t let a gas fireplace on for too long—specifically more than three hours at a time.
Can you close glass doors on a gas fireplace?
Can the glass doors on my fireplace be closed when my gas logs are burning? No. You must leave the doors open when you are operating RealWood Elite gas logs to avoid damaging the controls.
Do I need a door on a gas fireplace?
When the gas logs are in use, the chimney damper must be in the full open position, allowing 100% of the exhaust (carbon dioxide and water) to be directed up the flue and out of the house. Because of the damper position requirement, the use of masonry fireplace glass doors is required with a vented gas log setup.
What is the wall switch for on a gas fireplace?
The wall switch of a gas fireplace works protects the gas valve from accidentally turning on. It is a safety measure associated with a pilot flame and a thermopile.When should I close my fireplace flue?
The damper should always be fully open before lighting a fire and when the fireplace is in use. Close it when it’s not it use. Operating the fireplace with the damper partially closed will not generate more heat. Instead, blocking the passage through the flue will result in smoke entering the home.
Will a gas fireplace work without electricity?Yes! All Regency gas fireplaces, inserts, and stoves can operate safely during a power outage. The fireplace will continue to produce radiant heat and warm up the home. If your unit has a blower, it will no longer work; however, a fireplace blower is not necessary for the operation or safety of the fireplace.
Article first time published onDo gas fireplaces burn a lot of gas?
Realistically, most gas-powered fireplaces will burn through about $1 worth of natural gas per day. This will yield about 68,807 BTU of heating output.
Does the pilot light always stay on in a gas fireplace?
Should the pilot light always be on in a gas fireplace? Most gas fireplaces rely on a “continuous pilot light,” a type of pilot that remains lit so long as gas is flowing to the unit. … If you have a continuous pilot light system, you should always see a pilot flame unless you have manually turned the system off.
How hot does it get behind a gas fireplace?
The area surrounding the fireplace can get hot as well when a fire is burning—in some cases, it can get as hot as 190 degrees.
Do you have to open the damper for a gas fireplace?
The damper in a gas fireplace should remain open all the time. The glass between the firebox and your home prevents cold or heat from coming down the chimney and by leaving the damper open at all times, you eliminate the risk of having gas build up or backdraft into your home.
Is my fireplace damper open or closed?
Before lighting a fire, you can tell if the damper is open by placing your hand into the fireplace. If you feel a draft coming down the chimney, it is a good indicator that the damper is open. If you don’t feel any cold air coming down the chimney, it means that the damper is closed.
Should you close the flue on a gas fireplace?
As a general rule, if you have a gas log fireplace, you should never close your flue when in operation. If the fireplace is not operating, but the pilot light is lit, you should not close your flue.
How do you bleed gas lines on a gas fireplace?
While pressing the valve control knob in, press the igniter button repeatedly until the pilot ignites. This could take anywhere from one to 10 minutes to bleed air out of the lines as the gas starts to flow. Once the pilot is lit, continue to press the valve knob inward for 30 seconds before releasing it.
Can you sleep with gas fireplace on?
There is a risk of carbon monoxide poisoning when you sleep in a room where a conventional coal or gas fire, a log burner, a cooker, or a back burner is left on overnight. You cannot feel the early symptoms of carbon monoxide poisoning, so it is important that you protect yourself.
Can a gas fireplace heat a whole house?
Gas Logs are normally installed inside an open masonry fireplace. They may radiate heat in front of the fireplace, but they will not be able to heat an entire home.
Can gas fireplaces explode?
Although convenient, these home gas fireplaces pose significant risk of explosions and house fires if they are improperly installed or maintained. Gas Fireplace leaks can result in carbon monoxide poisoning, but can also result in explosions that can level an entire neighborhood block.
Do gas fireplaces have to have a glass front?
Not if your fireplace was shipped with a glass panel on the front. Direct vent fireplaces are sealed combustion systems and need the glass on to function properly. … The other type of gas fireplaces we sell, called B-vent fireplaces, come with fixed, not sealed, glass fronts.
What is the purpose of glass doors on a gas fireplace?
Fireplace glass doors increase fire heat – When closed during a burning fire, Fireplace glass doors can more than triple the net heat realized in your home. (Doors should be open when burning a moderate to large fire or when burning gas logs.)
Why is there glass on my gas fireplace?
Safety. Efficiency isn’t the only benefit of a glass-fronted fireplace. The fact that they are airtight and sealed means that the room is safe from exhaust fumes. All Escea gas fireplaces are all glass fronted because this is the only way to seal the combustion area of the fireplace.
Should I open a window when using fireplace?
Open a window when using the fireplace to prevent the room from becoming smoky. The air coming in from the window will go up the chimney. Before making a fire, open the glass doors, pull aside the screen curtains, and place the kindling, newspaper and logs inside. … The window needs to be open only a few inches.
What's the difference between a damper and a flue?
The flue is simply the open middle of the chimney that the smoke goes up. … A damper is intended to shut off– either fully or partially- the chimney flue. The reason you’d want to do that is to keep heat ($$$) from escaping up the chimney.
Should damper be open or closed with gas logs?
always fully open the damper. If you’re burning wood, keep it fully open until all the burning embers are completely burned out. If it’s a gas log set, turn off the flames before the closing the damper as far as possible.
Why won't my fireplace turn on when I flip the switch?
What can happen over the years, is that the connections inside the switch can get dirty, corroded, or broken, causing a loss of this voltage at the switch. So by the time the small amount of voltage gets sent back to the fireplace, it is not enough to signal the fireplace to turn on.
