Tie a Figure-8 in one end of a bungee cut to length, then slip the other end through the hole with the V and out the end of the pipe. Then thread the end of the bungee through the hole in the back from the outside, tie a Figure-8 in its end, and pull the knot tight inside the pipe.
How do you tie a tarp with a bungee cord?
To secure a tarp, insert the ball bungees through the grommet holes and wrap them around a pipe, a pole or a stake. Tighten canopies with bungee ties secured to the canopy frame. These elastic rubber bungee accessories will resist sun damage, too. Secure canopies to tent poles or stakes in the ground.
How do you secure a tarp in high winds?
Use additional bungee straps at key points to secure the tarp to either your trailer or the load itself. Another ratchet strap across the middle of the tarp will keep that section flat. Finally, wrap the entire perimeter of the load using bungee rope from corner to corner.
How do you seal elastic ends?
- Coat the cut ends of the elastic with liquid fabric stabilizer. …
- Overcast the ends of the elastic with a machine zigzag stitch. …
- Prevent fraying when making bands of elastic by overlapping the edges 1/2 inch and sewing a zigzag stitch over the edge of the elastic.
How do you tie nylon thread?
- Clip one end of the nylon thread to the clipboard. This will hold the thread securely. …
- Tie your knot just as you would any other. The nylon thread is slippery, so you will need to pull each part of the knot tight. …
- Heat the knot slightly. …
- Let the nylon thread knot cool.
