How do you read a smart meter with A and B button

press the A button.press the A button again until you see ‘METER INDEX’ and numbers followed by ‘M3’write down the number from left to right.ignore any zeroes at the beginning and any numbers after the decimal point.

How do you read Landis Gyr?

1. Press the A button to get to the ‘Credit mode bal’ screen.
2. Press and hold A for around 2 seconds, until the screen shows the time.
3. Press the A button a few more times to go through the meter’s screens until you see your ‘Total Act Export’ reading in kWh.

How do I find my Landis Gyr meter number?

1. If you have a Hexing meter – Press 804.
2. If you have a Landis+Gyr meter – Press i000 (i is the information button below the number 9)
3. If you have a Conlog meter – Press #100#
4. If you have a Wasion meter – Press 75 Enter.

What does the B button do on a smart meter?

press the white B button – the screen will light up. wait until the screen says ‘meter boost‘ – press ‘A’ to select ‘no’ and you should see numbers followed by ‘KWH’ write down the numbers from left to right. ignore any zeroes at the beginning and any numbers after the decimal point.

How do I reset my Landis Gyr meter?

Turn off all appliances. Press any button on the meter to reset the meter. Turn on only the appliances that you need. If you do not reduce the number of appliances being used, the meter will trip a second time.

How do you read a meter on a smart meter?

1. Press 9 on the keypad.
2. A series of letters will appear: IMP KWH.
3. Then you’ll see 8 digits (e.g. 0012565.3) followed by kWh at the bottom right of the screen.
4. This is your read, so in this case your reading would be 12565.

Is Landis Gyr e470 a SMETS2?

Yup! As the SMETS2 variant, these ones work freely with any supplier, even if you’re no longer with the one that installed the meters.

How do I get rid of error 30 on my prepaid meter?

Error 30 – Technical error on your meter – please switch your meter off as well as your electricity mains and wait a few minutes. Turn back on and retry the token. If this error 30 persists you should contact your municipality and get a technician to have a look at the meter.

How do I read my electric meter reading?

1. Read the dials from left to right.
2. If the pointer is between the two numbers, always take the lower number.
3. If the pointer is directly over a number, write down that one.

How do I reset my Eskom prepaid meter?

Press the I key followed by 008. The consumption and number of days are displayed on the meter. The day and consumption counters will be reset by pressing the i key twice.

Article first time published on

How do I find my power meter number?

Your meter number is usually stamped or printed at the bottom of the face plate in BOLD BLACK numerals and can be up to ten digits in length.

What is the B button on gas meter?

This is your electricity reading. If your meter has an ‘A’ and ‘B’ button, press ‘A’ until you get to TOTAL ACT IMPORT. The number below this is your electricity reading. Your meter might have three buttons to the side of the display.

What type of smart meter is a Landis Gyr E470?

Landis & Gyr E470 Smart Electricity Single Phase Meter with Remote Monitoring.

What type of meter is Landis Gyr?

Revelo™, the IoT Grid Sensing Meter Landis+Gyr’s Revelo metering family introduces a new generation of meters as IoT grid sensors benefitting both utilities and their customers. Demands on the grid edge are changing, requiring a meter that moves beyond traditional meter-to-cash capabilities.

What type of meter is a Landis Gyr E470?

Landis + Gyr Electricity Smart Meter (ESME) – E470 Series 2 SMETS Meter.

Is a Landis Gyr E350 a smart meter?

Do you need to invest twice? E350 is designed to function as a traditional meter (standard type 5 or 6) by leaving the module section vacant. You have the flexibility of inserting the communications module to upgrade the E350 into a smart meter at any later date.

How do you read a smart meter in Qld?

To conduct a reading, note the numbers from each clock, from left to right. If a pointer is between 2 numbers, note the lower number. When the pointer is between 0 and 9, read 9. The additional dial labelled 1/10 is not used to calculate your meter reading, so you can ignore this.

How do you read Aurora smart meter?

1. Stand directly in front of your meter.
2. Read the dial on the left first. (Ignore the dial underneath).
3. Look at the two numbers the pointer is between and record the lowest number. (If the pointer is between 9 and 0, record 9.)
4. Do the same with each dial, reading left to right.

What do the numbers mean on a smart meter?

There are three displays on your smart meter. The first lets you know if your electric service is on. … The second shows you how much electricity in kilowatt-hours (kWh) you have used for the current billing term. That’s also called your cumulative usage. The third number shows your electricity demand reading.

How do I know what kind of smart meter I have?

The easiest way to tell is to look at your electricity meter. If the serial number starts with 19P, this indicates it’s a SMETS1 meter. If it starts with 19M, then this means it’s SMETS2.

Does a smart meter need wifi?

No. Smart meters use an entirely separate, bespoke wireless system. You don’t need Wi-Fi in your home for it to work and it won’t use your Wi-Fi if you have it. Your smart meter and in-home display communicate via a secure national network which is solely for smart meters.

How do you read a smart meter first utility?

1. Press 9 on the keypad until you se ‘VOLUME’ on the display.
2. Then you’ll see a row of digits (e.g. 00063.5) followed by M3 at the bottom right of the screen. This is your reading.
3. Ignore any digits after a decimal point if you have one. …
4. The read in this example is 00063.