How do you make a simple dresser

Step 1 – Cut the Top, Bottom, Back and Side Pieces of the Dresser. … Step 2 – Drill Pocket Holes. … Step 3 – Assemble Bottom, Top, Back and Side Pieces. … Step 4 – Install Middle Divider Board. … Step 5 – Cut and Install Dresser Base. … Step 6 – Attach 1 ½” Board on the Front Perimeter of the Dresser.

How do you make a 6 drawer dresser from scratch?

1. Step 1 – Cut the Top, Bottom, Back and Side Pieces of the Dresser. …
2. Step 2 – Drill Pocket Holes. …
3. Step 3 – Assemble Bottom, Top, Back and Side Pieces. …
4. Step 4 – Install Middle Divider Board. …
5. Step 5 – Cut and Install Dresser Base. …
6. Step 6 – Attach 1 ½” Board on the Front Perimeter of the Dresser.

What can you make out of a dresser?

1. Space for a Sink. 1/11. Make a big splash in the bathroom by repurposing an old dresser as a vanity. …
2. Dressed for Dinner. 2/11. …
3. Drawer Decor. 3/11. …
4. Spring Wardrobe. 4/11. …
5. Tune In. 5/11. …
6. No Monster Under the Bed. 6/11. …
7. Open to New Possibilities. 7/11. …
8. Approach the Bench. 8/11.

How do you make a modern dresser?

1. Step 1: Remove Hardware. Modern Painted Dresser. …
2. Step 2: Remove Old Finish. Modern Painted Dresser. …
3. Step 3: Create Design With Tape. Modern Painted Dresser. …
4. Step 4: Cut Away Gaps for Dresser. Modern Painted Dresser. …
5. Step 5: Add Tape to Drawer Edges. …
6. Step 6: Paint. …
7. Step 7: Remove Tape. …
8. Step 8: Seal Exposed Wood.

How long does it take to make a dresser?

It took around 2 hours to build the dresser frame and another 1-2 hours to build the 8 drawers. The dresser frame was assembled in the living room, where there was much more room to work, and then transferred to its final spot in the bedroom BEFORE drawers were placed in (so it’s not too heavy).

How do you put legs on a dresser?

1. Remove the old base or legs by unscrewing and prying off glued parts. You may need to use a multi-functional tool to cut off the base.
2. Modify the base for new legs. (optional) Some dressers need extra support. …
3. Attach furniture leg plates. …
4. Screw in the new legs.

How many board feet make a dresser?

What you can expect from this package: Enough kiln-dried lumber to build one chest of drawers (approx: 75 board feet).

What is the best wood to make a dresser out of?

Some variety of hardwoods include ash, birch, maple and oak. Hardwoods are one of the best kinds of material to use for a dresser because of their heaviness, carving ability and attractive wood grains. Hardwoods, such as teak and mahogany, cost more due to their limited availability and high demand.

Can you make a dresser out of pallets?

Wooden Pallet Dresser We used 6 old pallets to create a custom and unique storage piece. I had all these pallets in my garage and was just itching to do something creative and unique with them. This is what happened. We pulled the boards off of one side of each pallet and stacked them so the openings were bigger.

How long does it take to build an Ikea chest of drawers?

Each box will, on average, take me around 30-40 minutes to unpack and assemble. So, if your chest of drawers comes in two big boxes, allow about an hour or so. A Pax wardrobe from IKEA that comes in one box will take me about 40 minutes, including hinged doors but not counting extras like drawers.

Article first time published on

What do I need to make a desk?

1. Measuring tape.
2. Pencil and paper.
3. 2×6 boards.
4. Circular, table, or miter saw.
5. 80-120-grit sandpaper.
6. Wood glue.
7. Table clamps.
8. Paint or stain.

How long does it take to put IKEA furniture together?

It is a good idea to plan the assembly over two days. Unless you are a wizard at assembling furniture, it’s going to be a bit of a process. If you become tired and grumpy you will be more prone to making mistakes.