How do you cut a bevel mat board

You want to do it the other way (mat cutter facing the outside of the mat) or else your bevel will be cut the wrong way. To cut the mat, you simply push down the thumb lever and slide the mat cutter up the line while applying pressure. Stop when the mark on the mat cutter reaches the next line.

Can a Cricut cut a beveled edge?

Note that most professionally cut mats are cut at a 45° angle (also called a bevel), clearly showing the core of the matboard. The Cricut will only cut straight up and down, so if you’re making archival type photo mats, you might want to take this into account.

How do you use Dexter Matt Cutter?

Tape the cardboard under-padding securely to the drawing board surface.
On the BACK of the mat board, measure and mark with pencil lines the area to be cut out. …
Place a Dexter #3 mat cutter blade on the angled slot for bevel cuts or in the perpendicular slot for straight cuts.

What is a mat cutter?

A mat cutter is a tool specifically designed for cutting the cardboard mat, or matting, used to mount art pieces. For artists, a mat cutter is a vital tool in the studio, allowing them to mount and frame work much more cheaply than a professional framing company.

Why did my knife blade cut through my Cricut mat?

When your Cricut cuts the mat, it means there is an error in the settings or that you’re using the wrong blade for your material. If the pressure is too high for a material, the blade will push through. An easy way to avoid this problem is to do a small test cut before cutting out your whole design.

What can I use instead of a mat board?

Use alternative forms of matboard: Scrapbooking papers (a wide selection can be found at any craft store), recycled, vintage papers (see above!), or even swatches of thick fabric can all be used to mat art and photography.

What is reverse bevel cut?

A reverse bevel is simply a mat that has been cut in the opposite way, so that the bevel is facing the art and not visible in your design. On some artwork, the bevel can be a distraction, especially a white bevel on dark imagery, so choosing a reverse bevel can be a thoughtful choice.

Can I use Exacto knife on Cricut mat?

I’ve cut materials using my xacto knife on this mat and it doesn’t damage the mat.

Do I need a mat cutter?

In order to cut mats you need a tool to cut the outer edges of the matboard, and a mat cutter to cut the beveled windows. … The do it yourself method can get quite costly if you plan on ordering full matboard sheets of 32×40″ as you’ll need a large format mat cutter.

What mat to use when cutting wood on Cricut?

First, you will need to use a StrongGrip cutting mat (the purple one). The Standard Grip mat is just not strong enough, so you will need the Strong Grip mat to cut wood. When you are cutting thick materials on your Cricut Maker, the knife blade is a must. You won’t be able to cut wood without this.

Article first time published on

What happens if you use the wrong mat for Cricut?

1 – Using the wrong mat. If you use a mat that isn’t sticky enough, your material could slide around and it won’t cut properly. If you use a mat that is too sticky, you may have trouble weeding it and removing the material from the mat without damaging it.

How do I know what blade is in my Cricut?

You can easily identify this blade in retail locations by the red or white protective cap. The blade housing that ships with the Explore machines was designed to house the Premium Fine-Point blades. The Cricut Explore Deep Point blade has a steeper blade angle (60 degrees vs. 45) and harder, more durable steel.