How do I unlock my GM NAV radio

Step 1: Insert your car key and set its mode to “Accessory” or “On.”Step 2: Turn on your radio and check that the letters “LOC” are displayed. … Step 3: Locate the preset buttons 1 and 4. … Step 4: Push the AM/FM button to get another three-digit code.

How do I turn off Theftlock on my GM radio?

Write down the user or factory back-up code.
Turn the ignition to ACCESSORY or RUN.
Turn the radio OFF.
Press the 1 and 4 buttons together. …
Press the Minute button and “000” will appear on the display.

How do you take theft lock off radio?

Use an original key (not a copied one) and insert it into the ignition.
Turn the key into the “On” position. …
Leave the key in this position for 10 minutes until the “Theft System” light stops flashing and goes off.
Flip the key into the “Off” position and leave it there for five seconds.

Why does my GM radio say locked?

GM Theftlock radios are designed to lock up automatically when the vehicle’s battery dies or becomes disconnected, though an electronic malfunction could also cause the Theftlock function to activate.

How do I reset my Chevy navigation system?

To reset your Chevy MyLink system entirely, hold down the Home and Fast Forward buttons simultaneously for 10 seconds. This should reboot the system and resolve any problems that you’re having.

What is my radio code?

The best place to locate a radio code is in the owner’s manual of your car. In most cases, the owner’s manual will be located in your glove box and will include general automotive service and maintenance tips, along with instructions on how to operate each system on the vehicle.

How do I unlock my car radio without the code?

Turn on your radio and see if it displays CODE or LOC. If it does, turn off the radio. Press and hold down the audio power button together with the SEEK button for about 50-60 minutes. Then, it will turn on without entering the radio code.

How do I find my GM radio code?

Press the buttons 2 and 3 at the same time and hold for about 10 seconds. Write down the code that displays on the screen. Press the AM/FM button and a new code should populate. Write this number down next to the first set and you’ll now have a six-digit code––a.k.a. the radio’s serial number.

How do I unlock my 2010 Chevy radio?

Press the power button on your radio for several seconds to unlock the system. If this doesn’t work, pull your vehicle’s codes by pressing and holding presets 2 and 3 for 10 seconds. Write down the 3-digit code that displays on the screen. Immediately press the AM/FM button.

How do I enter my GM radio code?

From any landline or cell phone, call the toll-free GM Radio hotline at 1(800) 537-5140. Step 2: Enter the code. When it requests a code, enter “106010” on the keypad, followed by the pound (#) sign. Step 3: Enter the radio serial number.

Article first time published on

How do I disable PassLock?

Leave the ignition key turned to the “On” position after the vehicle has stalled and will not start.
Look at the dashboard and locate the theft system light. …
Turn the ignition to the “Off” position to disable the PassLock system, and wait for 20 seconds for the system to reset.

How do I reset my Chevy utility radio?

Turn on your car. …
Press and hold down both the second and third preset buttons. …
Write down the two- or three-digit code that appears in the LED display.
Press the AM/FM button on the radio.
Write down the next two- or three-digit code that appears in the LED display.

How do you reset the radio on a GMC Sierra?

Navigate to your GMC IntelliLink home screen and click on ‘Settings. …
Select ‘Return to Factory Settings. …
You’ll be offered three options: Restore Vehicle Settings, Clear All Private Data, or Restore Radio Settings. …
When prompted to either Continue or Cancel, click ‘Continue.

How do I reset my radio in my 2021 Silverado?

Turn off the truck.
Find the radio fuse in the passenger side dash fuse panel.
Unplug the fuse.
Wait about 30 seconds.
Plug it back in.
Turn the truck back on.

How do I get my car out of anti-theft mode?

Step 1: Insert the key into the door lock. Use the side door on the driver’s side and the physical key even if there is a keyless entry system on the car. Step 2: Turn the vehicle key to unlock the car door without releasing it. Hold the key for 30 seconds in the position.

Why does my radio not work after changing battery?

If your car radio stopped working after a jump start, or after a battery charge, then the problem might still be related to a car radio code anti-theft feature. … If you hook directly to a battery, and any hydrogen gas has leaked from the battery, the resulting spark could ignite the gas and cause an explosion.

How do I unlock my Chevy Cruze radio?

Start the car and turn on the radio.
Press down on preset numbers two and three until a three-digit number displays on the radio. …
Push the AM/FM button and a new three-digit number will display. …
Call 1-800-537-5140. …
Enter 106010, and then press *.

How do I find my radio ID ESN or SID?

How to find your Radio ID/ESN: For many Sirius radios you can simply tune to channel 0 and the 12-digit Radio ID (also ESN, or SID) will be displayed. If it doesn’t appear, your Radio ID may also be found by accessing the Menu function of your radio (you can refer to your owner’s manual for specific instructions).

How do I reset my car radio after I change the battery?

The most common reason for a car radio to stop working after the battery has gone completely dead is that the radio has an anti-theft “feature” that kicks in whenever battery power is removed. When that happens, all you have to do is enter the right car radio code, and you’re back in business.

What are the radio ten codes?

10-1 = Receiving poorly.
10-2 = Receiving well.
10-3 = Stop transmitting.
10-4 = Message received.
10-5 = Relay message to ___
10-6 = Busy, please stand by.
10-7 = Out of service, leaving the air.
10-8 = In service, subject to call.

How do I fix passlock on GM?

How to Fix Passlock for Chevy Vehicles. A temporary fix is to leave your key in the ignition, at the “auxiliary” position for about 10-15 minutes until the security light shuts off. When the light shuts off you can try to start the engine again. Rinse, repeat, and cry.

How do I reset my passlock GM?

Insert your key in the starter, start you car as you usually would and let it stall. Keep the key in the “On” position. …
Wait until the “Theft Sys” light on your dashboard stays on without blinking. This will take approximately 10 to 15 minutes.

Where is passlock sensor located?

There is only one PassLock system. There is no sensor in the ignition lock cylinder, the Passlock sensor is in the ignition lock cylinder housing, and there is a magnet in the ignition lock cylinder.