How do i program an old intermatic timer

Erase all previous timer settings by sliding the control lever left to the “Off” position. … Move the control lever to the “On” position. … Turn the time dial clockwise until you reach the half hour that is closest to your present time. … Press the time dial to set the present time.

How do I reset my intermatic digital timer?

Press and hold the ON/OFF button. Press the Reset button for 3 seconds and release. The display will light up and then go blank. Release the ON/OFF button.

How do you program intermatic EJ351C?

Move the control lever at the top of the switch to the “Off-Clear” position for 20 seconds. …
Slide the control lever back to the “On” position. …
Turn the time-dial clockwise at least one click until you are at the half-hour nearest your current time.

How do you set an intermatic mechanical timer?

To set the time, pull the Intermatic Clock-Dial outward. Turn the dial in either direction and align the exact time of day on the Clock-Dial to the Time Pointer. The picture displays the timer set to 12:00 pm.

How do you test an Intermatic timer?

A: With a small flashlight, look into the Visual Motor Check window, near the top of the timer mechanism. If power is coming to the timer motor, you should be able to clearly see the gears moving through the small window. If not, then check the breaker that the time clock is connected to, turn it off and back on again.

How do I program my Leviton Smart Switch?

– Locate and open the Leviton “Decora Digital Dimmer & Timer” app on your smart device. – Select the “+” sign at the top right corner to add your Decora Digital device. – Follow the on-screen instructions to pair your smart device: – Hold the OFF button on your Decora Digital device until its status LED blinks.

How do you program a Stanley timer?

Plug the Stanley Light Timer into an outdoor grounded outlet.
Insert the plug for the holiday lights into the outlet on the timer.
Turn on the switch for your holiday lights (if there is a switch.)
Look at the LED display on the Light Timer.

Why is my Intermatic timer running backwards?

Running backward WILL cause the timer to bind up when it contacts the adjustable timer tabs. Check clearances of power wires before turning power back on to make sure nothing is shorting.

Do Intermatic timers go bad?

Intermatic timers are common among pool owners and typically last a long time, but they also can come with problems and may need to be fixed. Intermatic timers can typically be fixed by checking there’s power to the timer, resetting the time, renewing the ON/OFF trippers and renewing the gears or timer motor.

Why is my light timer not working?

If the timer doesn’t activate the connected light, it might be working but the light bulb in the fixture might be burned out. Get on a sturdy ladder and twist the bulb fully into the socket. … If the light still fails to turn on, the light bulb might be burned out. Replace the bulb with a new one.

Article first time published on

How do you set a Stanley outdoor timer?

Put the “on/timer” switch located adjacent to the dial to the “timer” position and plug the timer into the outlet. 3. Set the current time – turning clockwise, align the arrowhead (See diagram) on the dial of the timer to the present time (lines above the numbers are in increments of 30 minutes).

How do you program a Westinghouse Digital timer model 28442?

SET PROGRAM:  Press the “PROG” button to enter the program setting; you will see all the days of the week on the top and “1 ON” to the left of the display.  Press the “WEEK” button to set the program “1 ON” days of the week that you want the timer to function.  Press the “HOUR” button to set the program “1 ON” hour.

How do I set the timer on my Westinghouse Christmas lights?

Set the current time and date by holding the “Time” button. …
Set on and off times for your Westinghouse Christmas light timer by pushing the “Prog” button. …
Press “Prog” again. …
Press the “Time” button once to end programming and return to the current time.

How do you program a Westinghouse outlet remote?

Push and HOLD the same button for about 3-5 seconds, you should see the LED on the base start blinking slowly. On the Remote, push the ON button and wait 2 seconds. Push the OFF button on the Remote, and you should see the LED on the base stop blinking. The remote should now be paired with the base.