How do I pair my Xfinity xr5 remote

Put STB or adapter to enter pairing mode (refer to RF PAIRING instructions supplied with STB or adapter).Press and hold the SETUP key on the remote until the LED blinks twice.Press the MENU key on the remote and the remote will begin blinking as it attempts to pair.

How do I reset my Xfinity xr5 remote?

1. Press and hold the A (triangle) and D (diamond) buttons at the same time for three seconds until the status light changes from red to green.
2. Press 9-8-1.
3. The LED will blink blue three times to indicate that the remote was reset.

What are the codes for Xfinity remote?

• LG 10178, 11265.
• Panasonic 10051, 10250.
• Samsung 10812, 10060.
• Sanyo 10154, 10159.
• Sony 10000, 11100.
• Sharp 10093, 10165.
• Toshiba 10156, 11156.
• Vizio 11758, 11756.

Whats the Setup button on Xfinity remote?

On your remote, press and hold the Setup button. If you don’t have a setup button you can press and hold the Xfinity and Info(i) buttons together. The LED at the top of the remote will change from red to green. Enter 9-9-1.

How do I pair my XR16 remote?

Pair the XR16 Flex Remote to a TV Go to the Remote Settings menu. Press and hold the Voice (Microphone) button and say “Remote settings.” Choose “Voice remote pairing.” Follow the instructions on the TV to select your TV and audio devices.

Why is my Xfinity remote blinking red when I press a button?

If your LED blinks red five times when pressing any button, this indicates that your battery power is extremely low and the batteries should be replaced as soon as possible.

How do I pair my Xfinity XR11 remote?

Press and hold the Xfinity button and wait for the remote light to change from red to green. Then type in the three-digit code on the TV screen. Press OK to complete the pairing. Once your remote is paired, follow the TV on-screen instructions to set up control for your TV and audio device.

How do I program my XR15 remote to my soundbar?

1. Make the Soundbar the receiver output. …
2. Press the A and D buttons on the remote. …
3. Wait until the LED light at the top turns green. …
4. Enter the Soundbar’s manufacturer code. …
5. Wait for the LED light to flash twice (in green) …
6. Test the remote.

How do I connect my Xfinity remote to my soundbar?

1. Make your Soundbar the Default Output Receiver.
2. Press the ‘Setup’ Button on Your Remote.
3. Wait for the LED Light to Turn Green.
4. Enter Soundbar Manufacturer’s Code.
5. Wait for LED Light to Flash Green Twice.
6. Test the Remote Works.

Why is my remote control not working?

Clean the remote control terminals. The remote control battery terminals may be dirty. Remove the batteries and clean the remote control terminals with a small solution of alcohol, using a cotton bud or soft cloth, then place the batteries back into the remote control. Replace with fresh batteries.

Article first time published on

How do I find my Comcast pairing code?

On your computer visit in your web browser. Select “Receive a seven-digit code to pair using the Easy Pair App.” In your computer’s web browser, a seven-digit code will appear. Using the numeric keypad on your handheld X1 remote control, enter the code in the field on your TV screen.

How do I reset my XR16 remote?

Have followed the steps to factory reset the remote using the * and the i button for 3 seconds and then pressing power, back button and volume down.

How do I program my Cox XR11 RF remote?

1. Turn on the TV you are programming.
2. Press and hold the “Setup” button until the status LED at the top of the remote changes from red to green.
3. Type in the 4-digit or 5-digit code listed below using the number buttons.
4. If the code is entered correctly, the status LED will flash green twice.

How do I program my Cox contour XR11 remote?

For the Contour Voice Remote (XR11) or Contour Remote (XR5), press and hold the Setup button on the remote until the red LED on the remote turns green, then press the Contour (Menu) button. The LED on the remote flashes.

What does blue light mean on Xfinity remote?

If the status light blinks blue twice, the pairing for the remote has been turned off.

How do I control my Soundbar with TV remote?

Use the TV remote to navigate to Settings, select Sound, and then select Sound Output on your Samsung TV. Select your Samsung soundbar, and then select Close. Now you can use your TV remote to adjust volume and mute the soundbar. The soundbar should also turn on and off with the TV.

Why is the volume not working on my Xfinity remote?

If your Xfinity remote volume is not working, verify that your batteries work. If they do, try unpairing and repairing your remote or resetting both the remote and tv box. What is this? If you’re sure there aren’t any hardware defects on the Xfinity remote, contact Xfinity customer care or replace your device.

What is the code for Vizio sound bar?

1 – Program the Vizio sound bar to “TV” key on the Uverse remote using code 1009.

Does Xfinity have a remote app?

Setting up the Xfinity TV Remote App For Android, download from Google Play. Select the Xfinity TV Remote app on your device. Select Get Started. Sign in with your Xfinity ID and password.

Can I program my Xfinity remote to my DVD player?

Legacy Remotes The Comcast Platinum remote can control up to three devices like a DVR box, sound system, DVD player and/or TV.

Why is my TV not responding to my remote?

A remote control that will not respond or control your TV usually means low batteries. Make sure you are pointing the remote at the TV. There also may be something interfering with the signal such as other electronics, certain types of lighting, or something blocking the TV remote sensor.

How do I pair my fire stick remote?

1. Open the Firestick app on your iPhone, iPad, or Android.
2. Select your Fire TV device — or select Add device if you don’t see that option — then enter your account login information.
3. Enter your PIN to start using your phone as a remote.