How do I light the pilot on my boiler

Turn the gas to ‘pilot. ‘Press and hold the reset switch for one minute and hold a flame to the pilot light at the same time. … If all is working as expected, return any casing/doors and turn the gas from ‘pilot’ to ‘on.

How do I get the pilot light back on my boiler?

Turn the gas to ‘pilot. ‘
Press and hold the reset switch for one minute and hold a flame to the pilot light at the same time. …
If all is working as expected, return any casing/doors and turn the gas from ‘pilot’ to ‘on.

How do you relight an automatic pilot light?

Press the gas control knob down all the way and hold it in the depressed position. If you have no igniter, move the match or barbecue lighter flame to the end of the pilot tube; the pilot flame should light immediately. If you have a spark igniter, press the ignition button until the pilot flame ignites.

How do you pilot a boiler?

Turn the gas control knob to the “pilot” position, then press down on the knob. Pressing down on the knob will release gas into the pilot light orifice. Insert a lit fireplace match or a butane candle lighter into the access hole and light the pilot light. Keep holding down the control knob button as you do this.

How do I know if my boiler pilot light is out?

Locate the front cover panel on your furnace. It should be a little door that’s easily visible. …
If your pilot light is on, it should be easy to see – your eyes will be drawn to the little flame.
If you don’t see a flame, your pilot light is out.
If there is a flame, check the color.

How do you reset a pilot light?

Step 1: Turn off your furnace. …
Step 2: Locate your gas valve. …
Step 3: Hold down the red button. …
Step 4: Light the pilot light. …
Step 5: Let go of the button. …
Step 6: Turn your gas back on. …
Step 7: Turn your furnace back on.

Why won't my boiler pilot light come on?

If the boiler is not igniting, there is a possibility the valve is blocked, seized or there is damage in the wired connections. No Pilot Light: When the boiler is not igniting and the pilot light has gone out, this usually means debris has blocked the jet. … This could prevent the boiler from firing up.

Do boilers have pilot lights?

The pilot light is an important component of all older furnaces and boilers. The pilot light is the flame that lights the gas provided by the main burner. A small amount of gas is constantly released from the gas pipe, meaning that the flame lights the gas and it permanently burns.

How do you start a pilot light?

First, locate the pilot valve on the furnace. …
Find the gas valve and turn it to the “off” position. …
Turn the valve to the “pilot” position.
Press and hold the reset button.
If the reset button fails, ignite the lighter.

Does my combi boiler have a pilot light?

With today’s boilers you have no pilot lights, they are all automatic. You switch your heating on and the boiler goes through an auto ignition. … Once a small flame is present then the gas valve releases more gas to heat up the water circulating within the boiler.

Article first time published on

Why won't my pilot light light on my gas furnace?

There are several possible reasons why your gas furnace pilot won’t light: an ongoing draft, a faulty thermocouple, an accumulation of dirt, or an inefficient supply.

What causes the pilot light to go out?

Some of the possible serious reasons for pilot lights to go out include loose or broken gas valves, thermocouples or heat exchangers, faulty venting, low gas pressure, or high winds. If you believe there is a serious problem, don’t hesitate to contact a professional.

Should a pilot light always be on?

We recommend that you turn off your gas fireplace pilot light seasonally. Turning off your gas fireplace’s pilot light can save a substantial amount of energy and money. It is important to remember that not all gas fireplaces have “standing” pilot light, or, a pilot light that is “always on”.

How do you restart a gas boiler?

Refer to your boiler manual.
Push the reset button for 10 seconds.
Wait 2 – 3 minutes, the boiler should fire up.
Repeat twice if the first attempt fails.
If the boiler still fails to fire up on the third attempt, double check the gas supply.

Why does my boiler wont stay lit?

If it’s not staying lit though, then you’re probably dealing with a thermocouple issue. The thermocouple of a boiler system is a long metal wire that acts as a heat sensor for the pilot light. … If the pilot light goes out, then the electrical current stops, and the gas valve closes.

How do you light the pilot light on a gas log?

How do you light a gas log safety pilot? You turn the control knob to the pilot position, push the knob in, light the pilot with a match, then hold the knob down for 30 seconds or so until the pilot stays lit by itself. Once the pilot light will stay lit on its own, you can then move the knob to the “On” position.

Where is the pilot light on a gas furnace?

Near the bottom of your furnace is a switch that normally says “Pilot,” “On” and “Off.” Find this switch and turn it to the “Off” position. Wait at least five minutes. This is important because it gives the gas time to dissipate, which is necessary to avoid possibly starting a fire.

Should the pilot light always be on in a gas water heater?

The thermocouple’s job is to shut a gas safety valve if the pilot light goes out. That’s important because gas is always being supplied to the pilot to keep the flame lit. But if the pilot flame goes out, then the gas would still be released. After a while, the gas could collect in your home and become a health hazard.

Is it safe to relight a pilot light?

But first, some words of caution: –Don’t relight the pilot light if there is a strong gas odor. Close the main gas shut-off valve for your house or for the appliance with the leak and call the gas company immediately. Get everyone out of the house until the problem is corrected by gas company technicians.

Can a pilot light start a fire?

When the appliance is turned on, a valve releases more gas, which is ignited by the pilot light. … If this leak continues, its concentration may reach a point where a spark – such as that from a cigarette lighter, static electricity, or even the pilot light itself as it is re-lit – will cause a fire or even an explosion.

Will gas leak if pilot light is off?

If the pilot light goes out on a storage or instantaneous hot water heater, space heater or a ducted heater, you will not have a gas leak. This is because all modern gas appliances with pilot lights have a fail-safe device that closes off the gas to the appliance in the case when the pilot may go out.

How much gas do pilot lights use?

How much gas does a pilot light require? Most pilot lights consume around 600 BTUs of gas every hour. If you leave your pilot light on for an entire day, it would roughly consume 14,400 BTU’s every day.

What does lockout mean on a boiler?

Your boiler has probably gone into ‘lockout’, which is when it shuts down because it’s detected a problem. The good news is that if it’s a common fault, you may not have to call in a boiler engineer. The first thing to do when your heating goes out is check the power in your home, and the pressure in your boiler.

How do I reset my combi boiler?

REsET PROCEDURE To reset boiler, turn the mode control knob (D) to reset position and immediately turn knob back to required setting. The boiler will repeat the ignition sequence. If the boiler still fails to light consult a Gas Safe Registered Engineer or in IE a Registered Gas Installer (RGII).