Warranty Claims To initiate a claim, call Moen at 800-289-6636 (800-465-6130 in Canada; 01-800-718-4345 in Mexico), or write Moen at the address on the reverse side.
What is difference between Moen 1222 and 1222B?
There is absolutely NO difference between the Moen 1222 vs 1222B replacement cartridges. They are both the replacement part cartridge for the Posi Temp Moen shower valve. They are made from the same parts, the only difference is their packaging and model number. The “B” in the 1222B model number stands for Bulk.
Where is the part number on a Moen shower cartridge?
Exact model numbers can be found on your box or on your instruction sheet. If unavailable, you may find the general family series number on the back of the spout (non pullout).
Where do I find the model number on my Moen faucet?
Exact model numbers can be found on your box or on your instruction sheet. If unavailable, you may find the general family series number on the back of the spout (non pullout).How do I know if my Moen cartridge is bad?
- Leaking from the handle, tub spout or shower head when off.
- Difficult to open or close shower valve.
- Difficult to turn shower handle.
- Inability to get very hot or very cold water.
Why are faucets so expensive?
Faucets are made of different materials, which are also a factor that affects price. The higher priced faucets are made of materials such as solid brass, which generally provide a superior look, better performance, and durability. Other features, such as touch technology also impact price.
What is the difference between Moen cartridge 1224 and 1224b?
Answer: The 1224 is packaged in retail packaging sold at retail stores. … The 1224b is not in pretty retail packaging but just the cartridge only in a bag. All double handle faucets from Moen use the same cartridge.
Why is my new Moen faucet leaking?
There are generally two causes of water leaking from your Moen faucet. Because pull-out spray faucets have a single handle, the most common cause of the water leaking is the O-ring. … Remove the handle by pulling straight up and exposing the cartridge body and O-ring. Remove the O-ring and replace it with a new one.How do I know what Moen cartridge to buy?
The easiest way to find the Moen shower valve replacement cartridge you need is to know the series or model number of your Moen bathroom faucet. Exact information for these comes with any paperwork you have received when you first installed the original shower faucet (hopefully you saved it).
How do you remove a Moen aerator without a tool?Alternatively you could also use your finger nails. You will find small multiple ridges which protrude out and around the aerator (Delta, Moen and other manufacturers have the ridges), try and catch your finger nails onto the ridges and twist the aerator out in an anticlockwise motion.
Article first time published onWhere do I find my faucet model number?
The model number is printed on a tag that is attached to the cold water supply line of the faucet. The supply line is located below the sink, countertop, bath rim, or behind the bowl of a bidet. The model number, or part number, is typically preceded by “P/N.”
What is the difference between Moen 1200 and 1225?
Moen 1200 has an all-round brass design which ensures longevity in the long run. But in terms of performance, Moen 1225 can offer you better performance with its 1GPM water discharge rate. While Moen 1200 does not support Posi-Temp shower valves, Moen 1225 is compatible with almost any faucet.
How do I know what shower cartridge I have?
Use a caliper or ruler and measure the cartridge. Do this by measuring from the base to the tip (from seat to splines). Pay attention to the length tier of your cartridge (Lengths range from 1–12).
What happens when a faucet cartridge goes bad?
Signs that a cartridge faucet needs repair are water dripping from the spout, difficulty in adjusting the water temperature, hot water entering cold water outlets like toilet supply lines and inadequately heated water at some faucets.
How do you lubricate a Moen faucet cartridge?
For one-handle faucets with a 1225 cartridge, simply remove the cartridge and lubricate it both inside and out with a silicone-based grease (Moen part number 99915). Do not use plumber’s grade faucet grease, silicon sprays or any lubricant that may contain petroleum.
How much should I spend on a kitchen faucet?
Plan to spend at least $65 for a bath faucet and at least $100 for a kitchen faucet. You might get a great faucet for less, but it’s more likely that you’d get a low-quality faucet. If you spend much more, you’re paying for extra features or style rather than basic reliability or durability.
Should I buy expensive faucets?
A kitchen faucet will be used everyday, multiple times. This is one area where I say you should ‘splurge’ with quality. … A cheaper faucet may need to be replaced multiple times over the years where a more expensive, well-built faucet will last a lifetime.
Why are Grohe faucets so expensive?
Grohe is like Mercedes-Benz since they’re both German companies, while Kohler is like Ford, an American company. Grohe’s products have become much more durable with their tenacious materials and foundation, but this causes their faucets to be more costly and heavier in weight.
Are Moen cartridges interchangeable?
Moen shower faucets cartridges are not universal and therefore not interchangeable. … The faucets they are installed in work differently. The main difference between the Moen 1222 and 1225 cartridges is that faucets with the 1225 cartridge have water volume control while faucets with the1225 cartridge don’t.
What size Allen wrench does Moen use?
For the most part, Moen uses hardware that will require a 7/64 inch hex wrench. This applies to Moen Renzo faucets, handle set screws on one-handle kitchen faucets, and PosiTemp levers in Moen showers.
How do I identify my Moen valve?
Look closely at the handle buttons that were attached to the shower valve. Typically, “Moen” will be written in the middle of the “Hot” and “Cold” buttons. If you do not see this, the handle buttons have been replaced, or the “Hot/Cold” button is a lever (wall escutcheon).
