How can I hide my basement pipes

If you have several pipes together in one or more locations, you may be able to hide them with a box. If you are handy with a hammer and saw, frame a box around your pipes and then wrap it with paneling or drywall. Finish and trim as needed and stand back to admire your work.

How do you hide exposed plumbing?

You can hide your exposed pipes by wrapping them, painting them, hanging lights or decor on them, building shelving, hiding them behind furniture, or finding another purpose for them. Exposed pipes can bring down your room’s look and feel, but you’ve got options. Time to get creative!

How do you cover exposed pipes in a basement ceiling?

Paint It. If you have exposed metal water or drain pipes, consider taking a tip from brownstone dwellers everywhere and painting them. If you choose a bright white shade and paint your pipes and walls the same color, pipes in corners, along walls, and against ceilings may virtually disappear.

How can I hide my basement drain?

There are two main options for covering a basement floor drain: cement or a lid or cap. While a permanent option may be the way to go when finishing a basement, a temporary cap or lid is ideal in other situations.

How do you box up pipes?

Measure How Far the Pipes Protrude from the Wall. …
Measure the Length of the Area you Wish to Box-in. …
Cut Timber Battens to Size. …
Affix the Battens. …
Cutting the Front Board to Size. …
Affixing the Board. …
Fill Over Screw Holes and Caulk Along the Join.

How do you hide water pipes in walls?

You can purchase a wooden or plastic cover for your pipes at a hardware store to match your decor. Spray some adhesive spray over your pipe and wrap your covering around it completely. Cut off any excess with a box cutter or a utility knife to make your pipe look like a decoration.

What are pipe covers called?

Pipe covers, also known as pipe collars, conceal unsightly plumbing pipework, keeping it neat and tidy.

Why do my basement drains smell?

A strong sewer smell coming from your basement is most often caused from a dried out floor drain, a bad ejector pit seal, improperly vented appliances or fixtures, or even a damaged sewer line. … Most floor drains also include a cleanout plug inside that sometimes doesn’t get replaced.

How do you hide sewer pipes?

Hide the sewer pipe access point with small shrubs or a combination of fake and natural rocks. If you hide it with shrubs, using small shrubs is key because they won’t grow large root systems, which could damage the pipe. Place the shrubs 2 feet from the pipe so workers will have room to access the area if necessary.

How do I hide plumbing in my ceiling?

Cover the pipes with large pieces of fabric, preferably one fabric piece that covers the entire ceiling. Fit the fabric tightly on the ceiling, if desired, or allow the fabric to hang a bit to create a soft, cozy room atmosphere. Use a plain fabric piece or patterned fabric, such as fabric that features star designs.

Article first time published on

How do I cover a low basement ceiling?

Hide only the bits you don’t like. …
Paint everything black. …
Or, embrace a two-tone look. …
Cover ceiling tiles in fabric. …
Go with classic white paint for an exposed basement ceiling. …
Install a not-so-standard drop ceiling. …
Add artistic flair with wallpaper. …
Add a corrugated metal ceiling.

How do you hide ductwork in a basement ceiling?

Paint Your Duct Work. The fastest and least expensive way to cover your duct work is to paint it the same color as your ceiling. …
Use Soffits or Tray Ceilings. …
Create a Drop Ceiling. …
Opt for Flattened Ducts.

How do you make exposed pipes look good?

Use modular blocks. …
Build a bookshelf around and/or in front of your pipes. …
Use plants to conceal unsightly pipes and other exposed items you want to hide. …
Stitch a sink skirt to hide the pipes under your sink. …
Wrap your bathroom pipes with rope. …
Invest in steel pipes. …
Paint pipes in vibrant colors.

Can heating pipes be buried in walls?

Hi, you can chase the pipes into the wall. don’t try and brake through into the cavity. … (gives you the ability to sqare up those walls, you’ll love that when you come to do the tiling) There are no regs about burying hot cold or heating in walls, just gas! However isolating valves are required.

How do you hide copper pipes?

One of the simplest and cheapest ways to cover up the copper pipes that connect to your radiator is by installing pipe sleeves. Pipe sleeves (or covers) simply slot over your copper pipework and gives a beautiful feeling of completeness to any radiator installation.

Can you plaster over pipes?

Yes. All copper pipes should be covered with something, especially if sand & cement is used. A bit of movement is better as you say. Some plaster doesnt do any harm to copper.

What is a pipe sleeve?

Pipe sleeves are the most commonly used insulation. They are the simplest, quickest & neatest method to extend pipe lengths. Pipe sleeves cover and protect radiator pipes very easily. Pipe sleeves are also used to ‘sleeve’ two pieces of un-swedged pipes together. Used in central heating installations.

What are pipe collars for?

We will begin this article with plumbing vent pipe collars. These are the collars around the plumbing pipes that protrude through your roofs surface. … Some times leaks are caused by the plumbing pipe itself not being properly cleaned before the new collar is installed.

Can a stud finder find water pipes?

In general, yes. Stud finders are designed to find any obstruction in the wall – including water pipes. So if you are just handling a project around the house, you can rely on your stud finder to locate pipes. But if you are a plumber, you will still want to invest in a specific pipe detector.

How do you hide wires and pipes in a basement?

Paint to Match Ceiling. If you are looking for an easy, budget-friendly way to hide low pipes in your basement, paint is your best option. …
Fabric. Like painting, fabric offers a quick, inexpensive way to conceal pipes in your basement ceiling. …
Faux Wood Beams. …
Suspended Ceiling.

How can I finish my basement cheaply?

You can save on the cost to finish a basement by doing things not bound by codes: installing trim or doors, painting walls and woodwork, and installing flooring, says Buckeye Basements’ Jon Smith.

Can I cover a sewer pipe?

Your sewer pipes are not typically covered by standard homeowners insurance, but you can add service line coverage to repair your sewer pipe if it breaks or water backup coverage if it overflows into your home. … To extend your homeowners insurance to cover your sewer pipe, consider adding service line coverage.

How can I hide my PVC pipe?

Use Plants. One of the most popular ways to disguise exposed exterior pipes is to use plants. …
Use a Wooden Box. A wooden box is a great option for pipes grouped together. …
Use Decorative Objects. …
Paint the Pipe. …
Cover the Pipe. …
Industrialize the Pipe. …
Now You Know.

How do you fix a smelly basement?

Place bowls of baking soda around the basement. The baking soda will begin to absorb the odors and should make a significant difference over the course of a few days. You can also use bowls of white vinegar or clean cat litter—both will absorb odors as well.

Why does basement smell like rotten eggs?

Sewer gas. That “rotten egg” smell in the basement is sewer gas, or hydrogen sulfide. … A gas odor can be a sign of a small problem, like a dried out water seal in a floor drain. On a bigger scale, it can also indicate a broken sewer line or vent stack.

How can I make my basement smell better?

You can place bowls of white vinegar, cat litter in open containers, or baking soda throughout your basement in order to absorb the stench. You should notice a more pleasant smelling basement in a couple of days.

How do you hide pipes in a laundry room?

Go industrial.
Cover them with design tape.
Add wood pipe wrapping.
Add a bit of foliage.
Cover them with bins.
Build a false wall.
Replace them with better looking pipes.
Add wraparound lights.

What can I use to cover my basement ceiling?

If you don’t have obstructions hanging below your joists, you easily can finish your basement ceiling using drywall or paneling, such as 4-by-8-foot sheets of decorative grooved wall paneling. Sheet paneling is easy to install, but you’ll have to figure out what to do with the seams at the ends of the panels.

What is the cheapest way to cover a ceiling?

Paint. It’s a great way to change the perception of your space. …
Tin Tiles. Hide damage and uneven surfaces with tin ceiling tiles that introduce a vintage vibe. …
Moldings and More. …
Tiles or Planks.

Can you drywall a basement ceiling?

Installing basement drywall ceiling is the most cost effective methods to cover the floor joists and beams, and finishing your basement ceiling properly.