Can you use command hooks on concrete

Command™ Outdoor Products can also be used on smooth, sealed and finished surfaces including vinyl siding and fences, doors, windows, decks, gutters and trim. The Outdoor Product line is not recommended for use on rough surfaces, such as cement board, brick or rough-sawn wood.

Do Command Strips work on concrete block?

Will Command™ Products stick to brick? No. Command™ Products are intended for mostly smooth surfaces such as those listed above. However, our products will stick to painted, smooth cinder block (the type found inside many school and office buildings).

Do Command hooks work on brick?

Do command hooks work on brick walls? Command stips only work on bricks if the brick is painted, and not too rough. Think more on the lines of painted concrete block, much smoother, rather than a rougher brick. The issue is the surface area the adhesive has to have enough flat smooth surface to grip onto.

How do you hang things on a concrete wall?

You can use wall spackle around your anchor and put it into the wall that way — just make sure it dries before you insert the screw. Using a screwdriver or the screw bit on your drill, screw the screw into place in the anchor, leaving a bit coming out of the wall so you have a surface on which to hang your photo.

How much weight can outdoor Command hooks hold?

The large strips can handle a 24-inch to 36-inch object that weighs up to 16 pounds. The smaller hanging strips can only handle up to 4 pounds.

How can I hang something on a concrete wall without drilling?

Hardwall hangers are picture hooks intended specifically for difficult surfaces like concrete block and brick walls. The plastic hook attaches to the wall with small metal nails that pound into the wall surface with a hammer.

How do you hang a hook on a concrete wall?

Hold the hook on the concrete block wall. …
Drill a pilot hole through each mark, using a hammer drill with a masonry bit. …
Unscrew the mounting screws from the sleeves. …
Put the screw through the hook’s screw holes.

Can you hammer a nail into concrete?

When hammering concrete nails or masonry nails, it’s best to use a framing hammer, which is heavier and more substantial than a standard claw hammer. … This is best done with a hammer drill and a masonry bit that is the same diameter or slightly smaller than the nails you’re using.

How do you hang something on concrete?

Simply drill a hole into the concrete, hold the fixture you’re fastening over the hole, then use a hammer to tap the anchor into the hole. As you drive in the pin, the sleeve expands outward, trapping the anchor in the hole.

What sticks best to concrete?

What is the best concrete adhesive? Adiseal is the best adhesive to use on concrete as it has proven to be the strongest adhesive by an independent test. Adiseal is flexible, waterproof, high gap fill, high grab, UV resistant and sticks almost any type of material to concrete.

Article first time published on

Do 3M strips work on concrete?

Purchase the correct hook for your stuff. Hanging stuff on a cement wall is simple with the right supplies. Brick hooks and Command Strips make the job as easy as hanging stuff on drywall. If you are hanging something that isn’t too heavy, Command Strips may work best.

Will command hooks stick to stone?

Editor – Taysha, a wall anchor/brick hook could indeed work, but requires you drill carefully using a masonry drill bit. … We’d recommend you skip this and use easily removable 3M Command Hook Strips.

Can Command hooks hold curtain rods?

And the answer is brilliantly simple. Look no further than 3M Command hooks. Yes, the same hooks you use for hanging pictures, keys, mugs, and plants. An easy hack turns them into quick DIY supports for your curtain rod and that splash of color, sun shade, or bit of privacy you’ve been searching for.

Are Command Hooks strong?

Jumbo hooks allow you to hold up to 7.5 pounds! Using the revolutionary Command™ Adhesive, Command™ Decorative Hooks hold strongly on a variety of surfaces, including paint, wood, tile and more. … Holds up to 7.5 lbs.

Will 2 Command hooks hold twice the weight?

If the hook you are using has the space for two to be side by side, or if you are putting it directly onto something and can put them side by side, all of the instructions indicate this does double the amount of weight that can be held up.

Can you nail into concrete wall?

Drive the masonry nails directly into concrete walls with a hammer. Masonry nails are hardened and have grooved shafts and flat heads. Masonry nails should penetrate the surface of the concrete wall to a depth of 3/4 to 1 inch for a solid hold.

Is there a glue for concrete?

Concrete glue is an adhesive designed for adhering porous concrete to other surfaces—a difficult task without the right product. … In fact, you can use a construction adhesive for gluing metal to concrete, fixing up crumbling roadways, and even garden stones. Whatever the job, there’s an adhesive to help you get it done.

Can Liquid Nails be used on concrete?

Details: LIQUID NAILS® Concrete & Mortar Repair, (CR-805), is a weather-resistant indoor/outdoor acrylic compound with silicone, ideal for repairing and sealing cracks and joints in concrete and masonry surfaces. This easy-gunning sealant dries gray similar to concrete or can be painted.

Can you use Gorilla Glue on concrete?

Gorilla 2 Part Epoxy is useful for gap-filling, repairing exterior siding, or gluing plastic, wood, metal, ceramics, brick, stone, concrete, glass, and foam.

Can you stick wood to concrete?

CT1 is the ultimate construction adhesive and sealant with a phenomenal bond to almost all materials, but in particular for these. CT1 is a unique hybrid polymer with no solvents in its makeup. It will remain incredibly flexible, making it the perfect choice for Sticking Wood to Concrete.

How do you get command strips to stick to concrete?

Command strips can only be applied to smooth surfaces. Avoid adhering them to brick walls, textured wallpaper, concrete or timber. Strips work best on clean, smooth surfaces, so wipe the wall with isopropyl rubbing alcohol (methylated spirits) first. This will ensure your strip bonds properly with the wall.

What can I use instead of Command strips?

Adhesive Hooks. Adhesive hooks are great Command Strip alternatives because they are very affordable, easy to use, and leave no residue on your walls. …
Nails. …
Monkey Hooks. …
Hardwall Hangers. …
Corkboards. …
Hook and Loop Velcro Tape. …
Double-Sided Tape. …
Magnetic Dots.

Are Command Strips waterproof?

Yes. Command™ Bath Strips are water-resistant and hold strongly in humid environments. They are tested and proven to hold better than suction cups.

How do you hang garland on a stone without drilling?

Use brick clips to hang garland if you have brick or stone with recessed mortar. Brick clips are metal clips that hook into the gaps between bricks or stones where the mortar is. They work well for hanging garland on a brick fireplace or mantel or an exterior stone brick wall, for example.

Do Command Hooks take off paint?

Command strips can be beneficial during wall decoration as they enable you to hang pictures and other objects without harming your wall. However, if not removed carefully, they might ruin your wall by peeling off paint. At Premium Door Stripping we offer professional command strip removal services for you.

How do you hang garland on a concrete mantle?

Step 1: Gather your mantel decorations. …
Step 2: Clean the mantel. …
Step 3: Affix Command hooks to the mantel. …
Step 4: Lay the garland on the mantel to determine length. …
Step 5: Wire multiple garlands together. …
Step 6: Secure the garland to the Command hooks. …
Step 7: Fluff out the garland. …
Step 8: Add in branches and sprays.

How do you hang garland around a garage?

Use removable adhesive hooks to hang the garland without leaving marks. Attach adhesive hooks around the frame of the door about 12 in (30 cm) apart. Wrap the garland in wire, and wait a few minutes for the adhesive to bond with the door before you hang the garland by its wire.

How do you hang garland on an outside wall?

Attach hooks to the top of your door for easy installation. Purchase 5 to 6 wall hooks that have sticky backings. Place them about 1 foot (0.30 m) apart from each other on the wall above your door. Hang your garland on the hooks and let the ends frame the outside of your front door.

What is a gorilla hook?

Hillman Monkey Hooks are a great way to hang your mirrors and pictures efficiently and securely. Simply use hook to puncture wall, twist down so hook is facing out, and push hook into wall. No pilot hole necessary. Hang pictures and mirrors in seconds. Designed for heavy duty hanging.

What size curtain rod will fit in command hook?

One of the keys to successfully using command hooks for curtain rods is being mindful of weight and size. I do not use rods larger than 3/4″ in diameter. I’m also careful to use lighter materials, paying close attention to the finials. For example, look for acrylic over glass.