Can I use 2Rx8 instead of 1Rx8

Generally you can mix 1Rx8 and 2Rx8, as well, though mixing different kinds of RAM sometimes prevents interleaving (i.e., it might be a tad slower). I do recommend running a memory test after RAM upgrades, though.

Which is better 1Rx8 or 1Rx16?

Hi: The difference is the memory density. 1Rx16 is lower density memory than 1Rx8. 1Rx16 memory is very hard to find, and since the 8 GB chip is 1Rx8 and you want to add another one, that is what you should look for.

What is 1Rx8 1Rx16?

1Rx16 and 1Rx8 refers to the bus width of each of the memory chips. 1R means there is 1 64-bit “rank” of memory chips (a row of memory chips which can be accessed simultaneously, independently of other ranks), x8 means each memory chip has an 8-bit bus (so there are 64/8=8 memory chips on the module) x16 m.

What type of RAM is 1Rx8 PC3?

This item Samsung 4GB 1Rx8 PC3-12800U-11-12-A1 Desktop MemorySamsung 4GB PC3-12800U 1600MHz DDR3 SDRAM Desktop Memory M378B5173DB0-CK0Number of Pins240240RAM Memory TechnologyDDR3DDR3Size4 Gb4 GbRAM TypeDDR3 SDRAMDDR3 SDRAM

What does 12800s mean?

New chipsets and processors from AMD® and Intel® now support memory operating at 1600MT/s (aka 1600MHz). DDR3-1600 memory has a module classification of PC3-12800, which effectively means the peak data rate of the module is 12.8GB/sec (see table). That’s about a 17% improvement on memory bandwidth over DDR3-1333.

Can I mix 1Rx16 and 1Rx8?

As far as I can tell from google search, 1Rx16 and 1Rx8 are usually intercompatible, but not always. You should make sure you use SODIMMs (laptop memory modules) of the same frequency, as if you use modules of a different frequency, they will both run at the frequency of the slowest module.

What is DDR3 vs DDR4?

What are the advantages of DDR4 over DDR3? DDR4 modules are more energy-efficient, operating only at 1.2V compared with DDR3’s 1.5V or 1.35V. The reduced power consumption gives substantial power savings and allows operation at higher speeds without higher power and cooling requirements.

How do I know if my RAM is x16 or x8?

  1. It would be in the documentation of the system. …
  2. Look at the sticker on the RAM stick. …
  3. Open the back of your laptop and tell us what the model number of the ram is. …
  4. The problem is that the preinstalled RAM is hidden somewhere, and I don’t want to damage nothing.

Is 1Rx8 single rank?

Single rank is usually labeled as 1Rx (1Rx8/1Rx8/1Rx16), dual rank memory is labeled as 2Rx (2Rx8/2Rx8/2Rx16), and quad rank as 4Rx (4Rx8/4Rx8/4Rx16). It’s important to note that the physical arrangement of DRAM chips on the DIMM doesn’t necessarily indicate the rank.

Can I mix single and dual rank RAM?

Yes, as long as both RAM sticks are capable of running at the same speed and timings, they should run fine in a dual channel configuration. In fact, the ram that makes up “dual channel kits” is really just two of the same sticks also sold individually.

Article first time published on

What is B3 and B4 in RAM?

The second 11/12 is the version of Serial Presence Detect (SPD) used for communication between the RAM module and the computer. The B3/B4 is the reference design file used for this design and Revision number of the reference design used. … The lower the number the fewer clock cycles it takes so in effect its faster.

How can I identify my RAM type?

  1. Know that DDR1 comes with an IC that touches the bottom and top of your RAM.
  2. Note that DDR2 comes with a more significant IC than the one in DDR3, but it’s smaller than DDR1.
  3. You will find that DDR3 has a square and small IC.
  4. As for DDR4, you will find its RAM right, in its center.

Can I mix x8 and x16 RAM?

Nothing is stopping you from installing a pair of x16 RAM in slot 2 & 4, and x8 RAM in slot 1 & 3. You are free to do your own compatibility testing. Such combinations are not guaranteed to work by memory manufacturers.

Is 10600 the same as 1600?

yes there compatible, pc10600 is slightly slower ram is all.

What is the difference between 12800 and 10600 RAM?

10600 is 1333 ddr3 and 12800 is 1600 ddr3.

How fast is DDR3 1600?

Friendly nameIndustry namePeak Transfer RateDDR3-800PC3-64006400 MB/sDDR3-1066PC3-85008533 MB/sDDR3-1333PC3-1060010667 MB/sDDR3-1600PC3-1280012800 MB/s

Is DDR3 still good in 2021?

According to the DigiTimes, DDR3 is expected to gain value by 40-50% for the duration of 2021. … DDR3 maintains decent popularity due to the vast amount of systems that are still around, which are only compatible with the older memory technology.

When was DDR2 phased out?

Double Data Rate 2 Synchronous Dynamic Random-Access Memory (DDR2 SDRAM) is a double data rate (DDR) synchronous dynamic random-access memory (SDRAM) interface. It superseded the original DDR SDRAM specification, and was itself superseded by DDR3 SDRAM (launched in 2007).

Can you mix DDR3 and DDR4?

Yes, they would work with each other. Although, it’s not recommended to use different generation RAMs. The highest speed of DDR3 RAM is 2133Mhz whereas DDR4 speed starts from 2133Mhz. It is recommended to use memory with same value, speed & generation for best performance.

What is x8 based RAM?

The x4 and x8 refer to the number of banks on the memory component or chip. … Because a rank is 64 or 72 bits, an ECC module made from x4 chips will need eighteen chips for one single rank (18 x 4 = 72). An ECC module made from x8 chips needs only nine of them for a rank (9 x 8 = 72).

What is low density DDR3 RAM?

Low-density modules have more RAM chips with less memory each in comparison. Manufactures have increased chip density over the years and some older system cannot handle these higher density chips. Low-density (top) and high-density (bottom) RAM modules compared. Both are 4 GB DDR3.

What is memory density?

The density of a memory module refers to the number of the chips that are on the module. Different computers require the memory module to be built with a different number of chips. i.e. There is more than one way to build a 128MB or 256MB memory module.

How do I know if my RAM is single or dual rank?

Multiply total number of chips (less any ECC chips) by the chip width. If it equals 64 its single rank. If it equals 128 its dual rank.

What is x16 in RAM?

The “x8” and “x16” distinction is a technical spec that’s mostly a concern to someone who’s actually writing the DRAM controller. When you’re shopping around for actual memory chips, the sizes aren’t in something like 1024 MB or 512MB. … Whereas x 16 would 2 bank groups of 4 memory banks.

What does CAS latency mean for RAM?

The CAS latency is the delay between the time at which the column address and the column address strobe signal are presented to the memory module and the time at which the corresponding data is made available by the memory module.

What does x8 based mean?

x8. This refers to the bit-width of the chip. x4 chips are required for some of the more advanced server board features, such as chipkill. Boards relevant to readers of this thread (SR-2 and SR-X) don’t have such features, and thus are unlikely to benefit from having x4 chips.

What is dual rank RAM?

Dual Rank Memory is basically like having two Single Rank chip ranks on one memory module, with only one rank accessible at a time. … Dual and Quad Rank DIMMs provide the greatest capacity with the existing memory technology.

Can 8GB RAM dual rank?

The number of ranks can hint at the storage capacity of the RAM stick. However, it mostly depends on the technology of the chips placed on the memory stick and the DDR generation. … Since you can have a single rank 8 GB or even 16 GB module, both dual rank or quad rank 32GB memory sticks are possible.

What does Sr and Dr mean in RAM?

SR = Single Rank. DR = Double Rank. To achieve higher frequency, you should pick Single Rank memory kits.

Are all 16GB DIMMs dual rank?

Furthermore not all 16GB DDR4 modules are automatically dual-rank and not all 8GB DDR4 modules are single-rank.

What is B4 in RAM?

The second 11 or 12 is the version of Serial Presence Detect (SPD) used for communication between the RAM module and the computer. The B3 or B4 is the reference design file used for this design and Revision number of the reference design used. The CAS timing is what matters.

You Might Also Like