Toilet height is measured from the floor to the top of the seat. Heights vary enough to be noticeable. Most often, they fall somewhere between 15” and 19”, with standard toilets coming in under 17”. However, chair height toilets, what Kohler refers to as Comfort Height® toilets, measure 17” or more.
Can you get toilets in different heights?
Comfort height toilets vary in height. By and large, the seat tends to stand between 17 and 19 inches from the ground (43cm to 48cm). In contrast, a standard traditional height toilet stands at around 15 inches (38cm).
Which toilets are the tallest?
The Highline® Tall is Kohler’s tallest toilet – a full 2″ taller than Comfort Height® toilets to provide ultimate accessibility and ease of use. With its clean, simple design and efficient performance, this Highline® water-conserving toilet combines both style and function.
What toilet height is best?
The ideal height for your toilet will depend on three things. Standard toilets are usually around 15 inches high at the seat. If you are a tall person, that could be too low for you. You might want to check into a floor-mounted “comfort height” toilet that is 17 to 19 inches in height or elevated toilet seats.What's a comfort height toilet?
Comfort height toilets (or “right height” toilets) have higher seats than traditional toilets, usually between 17 inches and 19 inches. Comfort height toilets are becoming a popular option for many households.
What is the difference between standard and comfort height toilets?
Today’s so-called “comfort height” or “right height” toilets feature bowls that are 17 to 19 inches high, as compared to the standard 15 inches of a regular toilet. … And if you’re short or there are small children in your household, a right-height toilet may not be your best bet.
What is universal toilet height?
Standard toilets measure 15 to 16 inches from the floor to the top of the seat. This would be the toilet you would select for your home if your family has many young or short members. The seat of a standard toilet is lower than the seat of a standard chair.
How do you measure toilet height?
Toilet height is measured from the floor to the top of the rim. Whether it’s marketed as “chair height,” “comfort height,” or “tall height,” the best toilets to buy for your bathroom should have a rim height that makes it easy to sit down and stand up.What's better elongated or round toilet?
Most people find elongated toilet bowls to be more comfortable, but in a small bathroom, a round bowl can save space. Elongated toilet bowls measure up to 31″ from the wall, while round fixtures max out at 28″. Because round bowls are less expensive than elongated bowls, they save a few dollars, too.
Are comfort height toilets more expensive?For example, a comfort height, elongated bowl, two-piece Kohler toilet will cost approximately $168. The cost of installation will be about $178 for a total cost of $346. On the other hand, a standard height, elongated, two-piece American Standard toilet will cost approximately $170.
Article first time published onWhat is the difference between chair height and comfort height?
‘Chair height’ is commonly used for toilets bearing the height of 17 inches. ‘Comfort height’ also means chair height but is brand-specific. … The 17 to 19-inch height starts from the upper part of the seat and down to the floor. This is the number set by ADA or Americans with Disability Act for compliance.
How often should toilet be replaced?
Typically, toilets need replacement after 25 years of use so this can be considered the average toilet lifespan. Some would argue that the porcelain toilet itself has a much longer, and even unlimited, lifespan and that it’s only the components inside that need repairs and replacements.
Can I put a round toilet seat on an elongated toilet?
Can I Install A Round Toilet Seat On An Elongated Toilet? While you can install a round toilet seat on an elongated toilet, it isn’t recommended. A round toilet seat will not fully cover the toilet bowl rim of an elongated toilet leaving the rim exposed.
How do I know if my toilet is a 10 or 12 rough?
If the old toilet is still there, measure from the center of the capped bolts (on the bottom) to the wall (not the baseboard). There should be 24 inches of clearance from the wall facing the bowl and 15 inches on each side as a guideline. If your measurements are between 11.5 and 12.5 inches, it is a 12-inch rough-in.
Can you replace a 10-inch rough-in toilet with a 12-inch rough-in toilet?
The rough-in for your bathroom plumbing should match the rough-in for the toilet. Even if a toilet is designed for a 10-inch rough-in, you can still install it in a space with a 12-inch rough-in.
How do I know if my toilet is 10 or 12?
If your toilet has four bolts rather than the standard two, you’ll measure to the center of the rear bolts. The standard rough-in measurements are 10, 12 and 14 inches. If your measurement is in between these intervals, round your number down to the nearest standard measurement.
Is it OK to put bleach in toilet?
Yes, bleach can safely go down the toilet if it’s diluted with water. The water comes in handy to break down the bleach into salt and water, so it’s biodegradable. However, if you’re skeptical about using bleach, you can use vinegar and baking soda to get rid of hard stains from your toilet bowl.
Why do toilets crack?
A toilet is a sensitive piece of equipment. It is made of porcelain and can crack or break very easily, and simple repairs are often the cause of a cracked toilet. For example, fixing a broken component inside the tank and putting the lid back on the tank too hard can cause the toilet to crack around its top.
Is it safe to leave a toilet off overnight?
Yes, absolutely, fumes can be harmful when replacing a toilet, but they can be kept at a minimum and shouldn’t pose a health risk if you work reasonably quickly and keep the drainpipe covered between removal and installation. Sewage gases are toxic and also flammable.
How do I know what size toilet I need?
Measure from the wall behind the toilet to the center of one of the closet bolts (which hold the toilet down). If the toilet has four closet bolts, measure to the center of one of the rear ones. Then measure from the center of the mounting holes to the back of the new toilet you’re considering.
How do I know my toilet seat size?
Measure the width of the bowl at its widest point. Measure the length of the bowl from between the seat bolts to the outer edge of the front of the bowl. Round bowls should have a length of about 16 1/2 inches and elongated bowls should be 18 to 18 1/2 inches.
How many sizes of toilet seats are there?
As we said, toilet seats come in two sizes: round and elongated. Every toilet seat is one of these two, indicated on its packaging.
Can a toilet be more than 12 inches from the wall?
You can, but the back of the toilet tank will be two inches further away from the wall. The “rough-in” dimension refers to the distance from the wall framing (½-⅝″ behind the finished wall surface) to the center of the sewer pipe on the floor. Standard rough-in is 12 inches.
Why would I want an elongated toilet bowl?
Elongated bowls are also considered more ‘hygienic’ in that the larger surface area of the bowl makes is easier for men and children to use with less mess. The longer bowl size is also a requirement for ADA use, and the longer/wider bowl is generally easier to use for those with mobility issues.
How far does a toilet have to be away from a wall?
Most codes require at least 15 inches (measured from the center of the toilet) from any side wall or obstruction and not closer than 30 inches center to center to any other sanitary fixture. (The NKBA actually recommends 32 inches.) There should be at least 24 inches of clear space in front of a toilet or bidet.
