Are m10 and 38 the same

Metric CoarseMetric FineBSF/BSWM8 x 1.25M8 x 15/16″M10 x 1.5M10 x 1.253/8″M12 x 1.75M12 x 1.251/2″M14 x 2M14 x 1.59/16″

What is the standard equivalent to M10?

Metric CoarseMetric FineBSF/BSWM8 x 1.25M8 x 15/16″M10 x 1.5M10 x 1.253/8″M12 x 1.75M12 x 1.251/2″M14 x 2M14 x 1.59/16″

What does size M10 mean?

If the size is M10 x 25, that would mean that the diameter is 10 mm. … The 25 indicated a length of 25 mm. A matching nut would be labeled M10, which also doesn’t require a thread pitch since it’s a course thread fastener.

What size is a M10 bolt?

NOMINAL SIZE (D)BODY DIAMETERACROSS THE FLATSm1010.0015.73m1212.0017.73m1414.0020.67m1616.0023.67

Are M10 and 3/8 the same?

As George says the CG-5 does use the metric 10 x 1.5. That said, they are very close, the 3/8″ bolt is about 0.019″ smaller and the pitch’s are very close so the 3/8 -16 bolt will thread in the 10mm x 1.5 but the 10 x 1.5 bolt will not fit the 3/8 but..

Is M12 the same as 12mm?

Yes. M12 is a 12mm diameter thread. You have to be sure the thread pitch measured in threads per millimeter (1.5 here) is the same as what u need.

What's the difference between M10 and M12?

The only difference between the M10 and M12 is the external appearance.

What is a 10mm bolt in standard?

So what is a 10mm socket equivalent? The equivalent imperial size of a 10mm socket is a 3/8 socket. Imperial sizes are known as SAE (Society of Automotive Engineers) or Standard.

What size is M10 bolt in inches?

MetricClosest InchM8-1.255/16-18 (Smaller)M10-1.53/8-16 (Smaller)M12-1.751/2-13 (Larger)M14-2.09/16-12 (Larger)

What size head is a M12 bolt?

Diameter (d)PitchAcross Flats (s)M81.25mm13mmM101.5mm17mmM121.75mm19mmM142mm22mm

Article first time published on

What diameter is M12?

M12 bolts are a metric sized bolt with a 12mm thread diameter.

What does M12 mean on a bolt?

M12x1. 75 is the measurement code that indicates the thread size and thread pitch of a screw. The first half (M12), is the size measurement (metric) taken across the outside diameter of the thread (which in this case is 12mm).

What does M9 W10 mean?

Shoe sizeM6/W838-395-6M7/W939-406-7M8/W1041-427-8M9/W1142-438-9

What size is M10 drill bit?

Tap SizeDrill SizeM9 x 1.257.9mmM10 x 19.1mmM10 x 1.258.9mmM10 x 1.58.4mm

What size is M10 in Imperial?

Body Size MetricNearest Imperial Equivalent SizeM5-10-32M6-1/4-28M8-5/16-18M10-3/8-16

What is M10 inlet size?

Blanking plug is suitable to use with all bathroom or kitchen mixer taps with M10 (10mm) size water inlet, where one of the water inlets (either hot or cold) needs to be blanked, as only one water inlet to be used.

How can you tell if a bolt is metric?

The metric screw thread is identified by the capital letter M, followed by the nominal diameter. Metric threads are measured by the distance between two adjacent threads in millimeters (pitch). Threads on a standard (inch based) fastener are measured by counting the number of threads per inch.

How do you identify metric threads?

Metric threads are measured by their pitch. That is the distance from the crest of one thread to the crest of the next measured in millimetres. The pitch of a metric thread can be checked by direct measurement with a metric rule. Imperial threads have their pitch measured indirectly as a given number of teeth per inch.

Is a M10 bolt 10mm?

M10 (10mm) Thread Size (T) 6.6mm Head Length (H)

What size hole do I drill for a M10 bolt?

ThreadDrill size for tapping standard metric threadsClearance holeM86.89M108.511M1210.213.5M141215.5

What size socket is between 10mm and 11mm?

Bolt DiameterStandardMetric1/8″5/16″8mm3/16″3/8″10mm1/4″7/16″11mm5/16″1/2″13mm

Whats bigger 3/8 or 10mm?

10mm = just over 3/8 inch. 11mm = almost 7/16 inch. 12mm = almost 15/32 inch (= almost 1/2 inch) … 18mm = just over 11/16 inch.

What is 10 mm in the metric system?

10 millimeters (mm) =1 centimeter (cm)10 centimeters =1 decimeter (dm) = 100 millimeters100 centimeter =1 meter (m) = 1,000 millimeters1000 meters =1 kilometer (km)

What size bolt takes a 10mm socket?

The rule of thumb is that the drive size of the ratchet and sockets should approximate the diameter of the bolt or nut you want to turn. Thus, when you’re working with fasteners that are more or less 1/4″ or 6mm, use the 1/4″ drive. If you’re working with hardware that’s roughly 3/8″ or 10mm, use the 3/8″ set.

What size bolt has a 11mm head?

Bolt sizeSizeToleranceM711mm11.041/4″UNF7/16″11.153/16″BSW11.3412mm12.04

How wide is a M12 thread?

ThreadMajor DiameterPitch DiameterM1212.010.863M1414.012.701M1616.014.701M1818.016.376

What M12x1 75?

M12x1. 75 is the metric way to indicate a thread. M12 means that the OD thread is 12mm, the 1.75 is the step of the thread.

How do you tell if a bolt is SAE or metric?

Metric and SAE fasteners are measured differently and with different vocabulary. SAE nuts, bolts and screws are measured by their thread count, or TPI (threads per inch) and their length. Metric fasteners are measured by length and pitch, or the distance between threads.

How do I know if my bolts are standard or metric?

For both metric and standard bolts, the head size is the distance across the flats. For standard bolts, the head size is measured in inches or fractions of an inch. For metric bolts, head size is measured in millimeters. However, metric bolt head size is measured in millimeters.